MAX2027EUP-D Equivalent & Substitute Parts

Part Overview

The MAX2027EUP-D is an RF amplifier IC designed for ATE, ISM, PHS, UMTS, and WLL applications across the 50MHz to 400MHz frequency range. This component is classified as obsolete, which necessitates identification of equivalent substitute parts for ongoing system support and new designs. The MAX2027EUP-D operates with a supply voltage of 4.75V to 5.25V and delivers 15.5dB gain with a noise figure of 4.7dB in a 20-TSSOP surface mount package with exposed pad.

Substiute Parts

MAX2027EUP-D

Analog Devices Inc./Maxim IntegratedIn Stock: 1029MAX2027EUP-D Datasheet

Current PartRFQ

MAX2027EUP+D

Analog Devices Inc./Maxim IntegratedIn Stock: 1246MAX2027EUP+D Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX2027EUP-D is determined by strict equivalence across the following electrical and mechanical parameters:

• Frequency response: 50MHz to 400MHz
• RF gain: 15.5dB
• Noise figure: 4.7dB
• P1dB: 20.6dBm
• Supply voltage range: 4.75V to 5.25V
• Supply current: 60mA to 75mA
• Package: 20-TSSOP with exposed pad
• Surface mount configuration

The MAX2027EUP+D meets all electrical specifications and mechanical requirements for direct substitution. The primary distinction is packaging format and product status classification.

Parameter Comparison

Engineering Selection Recommendations

The MAX2027EUP+D is the direct equivalent substitute for the MAX2027EUP-D. Both components are manufactured by Analog Devices Inc./Maxim Integrated and share identical electrical performance specifications across all RF parameters, supply requirements, and package configuration.

The MAX2027EUP+D carries Active product status, ensuring continued manufacturer support and availability, whereas the MAX2027EUP-D is classified as Obsolete. Both components maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for new designs and legacy system support.

Selection between these parts should be based on availability and supply chain requirements. The MAX2027EUP+D is recommended for new designs and ongoing production due to its active status classification.

Frequently Asked Questions (FAQ)

Q: Can the MAX2027EUP+D replace the MAX2027EUP-D in existing designs?

A: Yes. The MAX2027EUP+D provides identical electrical performance and mechanical compatibility. Both components operate at the same frequency range (50MHz to 400MHz), deliver 15.5dB gain, and are packaged in the 20-TSSOP surface mount configuration with exposed pad.

Q: What is the difference between MAX2027EUP-D and MAX2027EUP+D?

A: The primary differences are product status and packaging format. The MAX2027EUP-D is obsolete, while the MAX2027EUP+D is active. The MAX2027EUP-D uses standard packaging, while the MAX2027EUP+D is supplied in tube packaging. All electrical specifications and RF performance parameters are identical.

Q: Are there any compliance differences between these parts?

A: No. Both components are ROHS3 compliant, REACH unaffected, and carry the same ECCN (EAR99) and HTSUS classifications.

Q: What supply voltage is required for operation?

A: Both the MAX2027EUP-D and MAX2027EUP+D require a supply voltage of 4.75V to 5.25V with typical supply current between 60mA and 75mA.

Q: Is the 20-TSSOP package with exposed pad suitable for high-frequency PCB layouts?

A: The 20-TSSOP package with exposed pad is designed for surface mount assembly and provides thermal management through the exposed pad connection. This package is standard for RF amplifier applications in the specified frequency range.