MAX192BEPP+ Equivalent & Substitute Parts

Part Overview

The MAX192BEPP+ is a Data Acquisition System (DAS) with integrated 10-bit ADC functionality manufactured by Analog Devices Inc./Maxim Integrated. This component features 8 channels, a 133 kHz sampling rate, and supports multiple serial communication protocols including MICROWIRE™, QSPI™, and SPI™. The device operates from a single ±5V supply and is housed in a 20-pin DIP package suitable for through-hole mounting. With active product status and full ROHS3 compliance, the MAX192BEPP+ serves as a standard component in data acquisition applications requiring moderate resolution analog-to-digital conversion.

Substiute Parts

MAX192BEPP+

Analog Devices Inc./Maxim IntegratedIn Stock: 982MAX192BEPP+ Datasheet

Current PartRFQ

MAX192BEPP+

Analog Devices Inc./Maxim IntegratedIn Stock: 982MAX192BEPP+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX192BEPP+ is determined by strict equivalence across the following critical parameters:

• Channel Configuration: 8-channel architecture
• Resolution: 10-bit ADC conversion
• Sampling Rate: 133 kHz minimum throughput
• Serial Protocols: Support for MICROWIRE™, QSPI™, Serial, and SPI™ interfaces
• Supply Voltage: ±5V single supply operation
• Temperature Range: -40°C to 85°C operating window
• Package Format: 20-pin DIP through-hole mounting
• Compliance Status: ROHS3 compliance and active product status

Only components matching all specified parameters across these categories qualify as direct substitutes. The MAX192BEPP+ represents the baseline specification; any deviation in channel count, resolution, sampling rate, protocol support, supply voltage, temperature rating, or package type disqualifies a component from direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The MAX192BEPP+ maintains active product status with full ROHS3 compliance and REACH unaffected classification, confirming its suitability for current design implementations. The component's Moisture Sensitivity Level of 1 (Unlimited) indicates minimal handling restrictions during assembly and storage. Selection of this part is supported by its established compliance certifications and continuous manufacturer support. When evaluating alternatives, confirm that candidate components maintain identical compliance status, active product availability, and matching moisture sensitivity ratings to ensure equivalent reliability and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the MAX192BEPP+?

A: A valid substitute must match all electrical and mechanical parameters: 8-channel configuration, 10-bit resolution, 133 kHz sampling rate, support for MICROWIRE™, QSPI™, Serial, and SPI™ protocols, ±5V supply voltage, -40°C to 85°C operating range, and 20-pin DIP through-hole package format.

Q: Can components with higher sampling rates replace the MAX192BEPP+?

A: Higher sampling rates do not qualify as direct substitutes unless all other parameters remain identical. Substitution requires exact parameter matching, not parameter enhancement.

Q: Is the 20-DIP package format critical for substitution?

A: Yes. The 20-pin DIP through-hole package is a mandatory substitution criterion. Alternative package formats, including surface-mount variants, are not considered direct substitutes.

Q: Does RoHS compliance status affect substitution eligibility?

A: Yes. Substitute components must maintain ROHS3 compliance status to ensure equivalent environmental and regulatory compliance. Components with different RoHS classifications are not acceptable substitutes.

Q: Can the MAX192BEPP+ be replaced with a component supporting only SPI™ interface?

A: No. The MAX192BEPP+ supports multiple protocols: MICROWIRE™, QSPI™, Serial, and SPI™. Substitutes must support all specified protocols to maintain system compatibility.

Q: What is the significance of the Moisture Sensitivity Level 1 rating?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity restrictions, allowing standard handling and storage procedures without special environmental controls.