MAX192BCAP Equivalent & Substitute Parts

Part Overview

The MAX192BCAP is a 10-bit Data Acquisition System (DAS) integrated circuit manufactured by Analog Devices Inc./Maxim Integrated. This component features 8 channels, a 133 kHz sampling rate, and serial data interface capability in a 20-SSOP surface mount package. The MAX192BCAP is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and new design implementations where this component is specified.

Substiute Parts

MAX192BCAP

Analog Devices Inc./Maxim IntegratedIn Stock: 2210MAX192BCAP Datasheet

Current PartRFQ

MAX192BCAP+

Analog Devices Inc./Maxim IntegratedIn Stock: 796MAX192BCAP+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX192BCAP is determined by strict equivalence across the following critical parameters:

• Channel Configuration: 8 channels (fixed requirement)
• Resolution: 10 bits (fixed requirement)
• Sampling Rate: 133 kHz (fixed requirement)
• Package Type: 20-SSOP with identical physical dimensions (fixed requirement)
• Mounting Technology: Surface mount (fixed requirement)
• Operating Temperature Range: 0°C to 70°C minimum (fixed requirement)
• Voltage Supply Architecture: Single supply operation (fixed requirement)

The MAX192BCAP+ qualifies as a direct substitute based on matching all critical electrical and mechanical parameters while maintaining identical pinout and package specifications.

Parameter Comparison

Engineering Selection Recommendations

The MAX192BCAP+ is the direct functional equivalent for MAX192BCAP applications. Selection between these parts is determined by regulatory and compliance requirements:

MAX192BCAP+ is the preferred selection for new designs and ongoing production. This part maintains active product status with Analog Devices Inc./Maxim Integrated and achieves ROHS3 compliance, satisfying current environmental and regulatory standards. The extended data interface support (MICROWIRE™, QSPI™, Serial, SPI™) provides additional protocol flexibility while maintaining backward compatibility with serial interface requirements.

MAX192BCAP remains suitable only for legacy system maintenance where RoHS non-compliance is acceptable and active inventory is available. The obsolete status indicates no further manufacturing or technical support from the manufacturer.

Frequently Asked Questions (FAQ)

Q: Can MAX192BCAP+ directly replace MAX192BCAP in existing designs?

A: Yes. Both parts share identical channel count (8), resolution (10 bits), sampling rate (133 kHz), package type (20-SSOP), and operating temperature range (0°C to 70°C). Pinout compatibility is maintained, enabling direct substitution at the component level.

Q: What is the difference in data interface capability?

A: MAX192BCAP supports serial interface operation. MAX192BCAP+ supports multiple serial protocols including MICROWIRE™, QSPI™, Serial, and SPI™. This expanded protocol support in the substitute part does not affect compatibility with designs using standard serial interface operation.

Q: Why is RoHS compliance important for this substitution?

A: MAX192BCAP+ achieves ROHS3 compliance while MAX192BCAP is RoHS non-compliant. For applications subject to environmental regulations or customer requirements mandating RoHS compliance, MAX192BCAP+ is the required selection.

Q: Are there any packaging differences between these parts?

A: No. Both parts use identical 20-SSOP packaging with 0.209" width and 5.30mm dimensions. Physical board layout and footprint requirements remain unchanged.

Q: What is the significance of product status (Obsolete vs. Active)?

A: MAX192BCAP is obsolete, indicating discontinued manufacturing and no further technical support from Analog Devices Inc./Maxim Integrated. MAX192BCAP+ maintains active status with ongoing availability and manufacturer support, making it the appropriate choice for new production and long-term system support.