MAX178BEWG+ Equivalent & Substitute Parts

Part Overview

The MAX178BEWG+ is a 12-bit analog-to-digital converter manufactured by Analog Devices Inc./Maxim Integrated, designed for single-ended input data acquisition applications. This SAR (Successive Approximation Register) architecture device operates at a 17 kHz sampling rate with external voltage reference configuration. The part is currently in active production status with full inventory availability. Equivalent and substitute parts are identified based on matching electrical specifications, package compatibility, and operational parameters that ensure functional interchangeability in target applications.

Key Parameters

Parameter	Specification
Part Number	MAX178BEWG+
Manufacturer	Analog Devices Inc./Maxim Integrated
Resolution (Bits)	12
Sampling Rate	17 kHz
Number of Inputs	1
Input Type	Single Ended
Architecture	SAR
Data Interface	Parallel
Reference Type	External
Analog Supply Voltage	±5V, 11.4V ~ 15.75V
Digital Supply Voltage	5V
Operating Temperature Range	-40°C ~ 85°C
Package Type	24-SOIC (0.295", 7.50mm Width)
Mounting Type	Surface Mount
Product Status	Active
RoHS Compliance	ROHS3 Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the MAX178BEWG+ are identified based on strict equivalence across the following critical parameters:

12-bit resolution requirement
17 kHz sampling rate specification
Single-ended input configuration
SAR architecture
Parallel data interface
External reference voltage requirement
±5V and 11.4V ~ 15.75V analog supply compatibility
5V digital supply voltage
24-SOIC package footprint
Surface mount capability
-40°C ~ 85°C operating temperature range
Active product status
ROHS3 compliance

Parts meeting all these parameters are classified as direct equivalents. No partial substitutes or functional alternatives are listed, as component selection in data acquisition applications requires exact parameter matching to ensure system performance and reliability.

Parameter Comparison

Parameter	MAX178BEWG+	Substitute Status
Resolution	12 Bit	Direct Match Required
Sampling Rate	17 kHz	Direct Match Required
Input Configuration	1 Single Ended	Direct Match Required
Architecture	SAR	Direct Match Required
Data Interface	Parallel	Direct Match Required
Reference Configuration	External	Direct Match Required
Analog Supply	±5V, 11.4V ~ 15.75V	Direct Match Required
Digital Supply	5V	Direct Match Required
Package	24-SOIC	Direct Match Required
Temperature Range	-40°C ~ 85°C	Direct Match Required
Product Status	Active	Active Status Required
RoHS Compliance	ROHS3	ROHS3 Required

Engineering Selection Recommendations

The MAX178BEWG+ is the primary component specification for this application. Selection of substitute parts must be based exclusively on matching all electrical and mechanical parameters listed in the Key Parameters section. Active product status ensures ongoing manufacturer support and supply chain availability. ROHS3 compliance satisfies environmental and regulatory requirements for industrial and commercial applications. MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints during storage and handling.

When evaluating substitute components, verify that all parameters match exactly before component selection. Deviations in resolution, sampling rate, supply voltage, package type, or temperature range will result in functional incompatibility and must not be used as substitutes.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the MAX178BEWG+?

A: A valid substitute must match all electrical specifications (12-bit resolution, 17 kHz sampling rate, external reference, ±5V and 11.4V ~ 15.75V analog supply, 5V digital supply), input configuration (single-ended), architecture (SAR), data interface (parallel), package type (24-SOIC), mounting type (surface mount), and operating temperature range (-40°C ~ 85°C). Product status must be active and RoHS3 compliance must be maintained.

Q: Can I use a higher resolution ADC as a substitute?

A: No. Higher resolution devices have different electrical characteristics, pin configurations, and firmware requirements. They are not interchangeable with the MAX178BEWG+ and must not be used as substitutes.

Q: Are there any package alternatives to 24-SOIC?

A: No. The 24-SOIC package is the specified form factor for this component. Alternative packages are not compatible with the PCB layout and must not be used.

Q: What is the significance of the external reference requirement?

A: The external reference configuration requires the application circuit to provide a stable reference voltage. Devices with internal reference configurations have different pin assignments and are not substitutable.

Q: Does MSL rating 1 affect component handling?

A: MSL rating 1 (Unlimited) indicates no moisture sensitivity. Standard handling procedures apply without special dry storage or baking requirements.

Q: Is the MAX178BEWG+ suitable for industrial temperature applications?

A: The operating temperature range of -40°C ~ 85°C covers industrial and commercial temperature specifications. Applications requiring extended temperature ranges require alternative component selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message