MAX152CPP+ Equivalent & Substitute Parts Reference

Part Overview

The MAX152CPP+ is an 8-bit analog-to-digital converter manufactured by Analog Devices Inc./Maxim Integrated, designed for single-ended input data acquisition applications. This component features a flash architecture with external reference capability, operating at a 400 kHz sampling rate with 1 µA power-down current consumption. The device is packaged in a 20-pin DIP configuration suitable for through-hole mounting.

The MAX152CPP+ is classified as obsolete. Identifying equivalent and substitute parts is necessary to support legacy system maintenance, design updates, and procurement continuity when original inventory becomes unavailable.

Substiute Parts

MAX152CPP+

Analog Devices Inc./Maxim IntegratedIn Stock: 2756MAX152CPP+ Datasheet

Current PartRFQ

MAX152CPP+

Analog Devices Inc./Maxim IntegratedIn Stock: 2756MAX152CPP+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX152CPP+ is determined by strict equivalence across the following critical parameters:

• Resolution: 8-bit conversion capability
• Sampling Rate: 400 kHz minimum performance
• Input Configuration: Single-ended input topology
• Data Interface: Parallel output protocol
• Architecture: Flash conversion method
• Reference Configuration: External reference support
• Supply Voltage Ranges: ±3V to ±3.6V for both analog and digital supplies
• Package Type: 20-pin DIP form factor
• Mounting Technology: Through-hole compatibility
• Environmental Compliance: ROHS3 certification

Based on the provided input data, the MAX152CPP+ is listed as its own direct equivalent. No alternative manufacturer parts meeting all specified parameters have been provided in the substitute parts list.

Parameter Comparison

Engineering Selection Recommendations

The MAX152CPP+ is classified as an obsolete product. For applications currently using this component, the following considerations apply:

Current inventory of 2,742 pieces is available in new original condition. The device maintains ROHS3 compliance and carries an MSL rating of 1 (unlimited moisture sensitivity protection), indicating robust handling characteristics for storage and deployment.

For legacy system support and maintenance applications, the MAX152CPP+ remains the specified component. When original stock becomes depleted, design engineers should evaluate alternative 8-bit ADC solutions from Analog Devices Inc./Maxim Integrated that maintain compatibility with the 20-DIP package footprint and parallel data interface requirements.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the MAX152CPP+?

A: A valid substitute must match all critical electrical and mechanical parameters: 8-bit resolution, 400 kHz sampling rate, single-ended input, parallel data interface, flash architecture, external reference support, ±3V to ±3.6V supply voltage range, and 20-pin DIP through-hole packaging.

Q: Why is the MAX152CPP+ listed as its own substitute?

A: The provided substitute parts list contains only the MAX152CPP+ itself. This indicates that no alternative parts meeting all specified parameters were included in the reference data. Additional substitute options may exist from other manufacturers but were not provided for this reference.

Q: Can I use a different package variant of the MAX152?

A: No. Package compatibility is a strict substitution requirement. The 20-DIP (0.300", 7.62mm) through-hole form factor is essential for PCB layout and assembly compatibility. Alternative package types are not interchangeable without circuit board redesign.

Q: Is the MAX152CPP+ suitable for new designs?

A: The MAX152CPP+ is classified as obsolete. For new designs, evaluate current-generation 8-bit ADC solutions from Analog Devices Inc./Maxim Integrated that offer extended product lifecycle support and improved performance characteristics.

Q: What is the significance of the ROHS3 compliance rating?

A: ROHS3 compliance certifies that the device meets Restriction of Hazardous Substances directives, restricting lead, cadmium, mercury, and other hazardous materials. This certification is required for many industrial and commercial applications and ensures environmental compliance.

Q: Does the MSL rating affect component substitution?

A: The MSL rating of 1 (unlimited) indicates the component has no moisture sensitivity restrictions and requires no special handling or baking procedures prior to soldering. This characteristic is maintained across equivalent parts and does not restrict substitution eligibility.