MAX13054ESA-T CANbus Transceiver Equivalent & Substitute Parts

Part Overview

The MAX13054ESA-T is a full-duplex CANbus transceiver IC manufactured by Analog Devices Inc./Maxim Integrated, housed in an 8-SOIC surface mount package. This component provides 1/1 driver/receiver configuration for CANbus protocol communication at 1 Mbps data rate. The part is currently classified as obsolete, making identification of active equivalent alternatives essential for ongoing production and design continuity. Substitute parts maintain identical electrical and mechanical specifications while offering improved availability through active product status.

Key Parameters

Parameter	Specification
Manufacturer	Analog Devices Inc./Maxim Integrated
Category	Interface
Type	Transceiver
Protocol	CANbus
Number of Drivers/Receivers	1/1
Duplex Mode	Full
Data Rate	1 Mbps
Receiver Hysteresis	70 mV
Supply Voltage Range	4.75V ~ 5.25V
Operating Temperature Range	-40°C ~ 85°C
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the MAX13054ESA-T is determined by strict equivalence across the following critical parameters:

Protocol & Functionality: CANbus full-duplex transceiver with 1/1 driver/receiver configuration
Electrical Performance: 1 Mbps data rate, 70 mV receiver hysteresis, 4.75V ~ 5.25V supply voltage
Thermal Specifications: -40°C ~ 85°C operating temperature range
Physical Form Factor: 8-SOIC surface mount package (0.154", 3.90mm width)
Compliance: ROHS3 compliant, MSL 1 rating

All substitute parts listed maintain 100% parametric equivalence across these criteria. Differences exist only in product status (active vs. obsolete), packaging format (Cut Tape, Digi-Reel, or Tape & Reel), and inventory availability. These packaging variations do not affect electrical or mechanical compatibility.

Parameter Comparison

Part Number	Manufacturer	Product Status	Protocol	Drivers/Receivers	Data Rate	Supply Voltage	Operating Temp	Package	Inventory (Pcs)
MAX13054ESA-T	Analog Devices Inc./Maxim Integrated	Obsolete	CANbus	1/1	1 Mbps	4.75V ~ 5.25V	-40°C ~ 85°C	8-SOIC	1,114
MAX13051ESA+T	Analog Devices Inc./Maxim Integrated	Active	CANbus	1/1	1 Mbps	4.75V ~ 5.25V	-40°C ~ 85°C	8-SOIC	15,300
MAX13052ESA+T	Analog Devices Inc./Maxim Integrated	Active	CANbus	1/1	1 Mbps	4.75V ~ 5.25V	-40°C ~ 85°C	8-SOIC	2,800
MAX13053ESA+T	Analog Devices Inc./Maxim Integrated	Active	CANbus	1/1	1 Mbps	4.75V ~ 5.25V	-40°C ~ 85°C	8-SOIC	5,100
MAX13054ESA+T	Analog Devices Inc./Maxim Integrated	Active	CANbus	1/1	1 Mbps	4.75V ~ 5.25V	-40°C ~ 85°C	8-SOIC	6,100

Engineering Selection Recommendations

All listed substitute parts are parametrically equivalent to the MAX13054ESA-T and are suitable for direct replacement in circuit designs. Selection among active alternatives should be based on:

Product Status: All substitute parts carry active product status, ensuring long-term availability and manufacturing support compared to the obsolete MAX13054ESA-T.

Compliance & Certifications: All substitutes maintain ROHS3 compliance and EAR99 or 5A991B4B ECCN classification. REACH unaffected status is confirmed for MAX13051ESA+T, MAX13052ESA+T, and MAX13053ESA+T.

Packaging & Inventory: MAX13051ESA+T offers the highest inventory level (15,300 pcs) in Cut Tape & Digi-Reel format. MAX13054ESA+T provides 6,100 pcs in the same packaging. MAX13053ESA+T (5,100 pcs) is supplied in Tape & Reel format. MAX13052ESA+T (2,800 pcs) is available in Cut Tape & Digi-Reel format.

Frequently Asked Questions (FAQ)

Q: Can MAX13051ESA+T, MAX13052ESA+T, MAX13053ESA+T, and MAX13054ESA+T be used interchangeably with MAX13054ESA-T?

A: Yes. All substitute parts maintain identical electrical specifications (1 Mbps CANbus, 1/1 full-duplex configuration, 4.75V ~ 5.25V supply, -40°C ~ 85°C operating range) and physical form factor (8-SOIC package). Pin-to-pin compatibility is confirmed.

Q: What is the difference between the substitute part numbers?

A: The substitute parts differ only in packaging format and product status. MAX13051ESA+T, MAX13052ESA+T, and MAX13054ESA+T are active products; MAX13053ESA+T is also active. Packaging variations include Cut Tape & Digi-Reel (MAX13051ESA+T, MAX13052ESA+T, MAX13054ESA+T) and Tape & Reel (MAX13053ESA+T). These differences do not affect electrical performance or circuit compatibility.

Q: Why is the original MAX13054ESA-T marked as obsolete?

A: Obsolete status indicates the part is no longer in active production. The active equivalents listed provide continued access to the same functionality with improved supply chain reliability.

Q: Are there any compliance or certification differences between the main part and substitutes?

A: All parts are ROHS3 compliant with MSL 1 rating. Substitute parts carry REACH unaffected status (confirmed for MAX13051ESA+T, MAX13052ESA+T, MAX13053ESA+T). ECCN classifications vary between EAR99 and 5A991B4B but do not affect functional equivalence.

Q: Which substitute offers the best availability?

A: MAX13051ESA+T provides the highest inventory level at 15,300 pcs, followed by MAX13054ESA+T at 6,100 pcs. Both are available in Cut Tape & Digi-Reel packaging suitable for automated assembly.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message