MAX1204BCPP+ Equivalent & Substitute Parts

Part Overview

The MAX1204BCPP+ is a 10-bit analog-to-digital converter manufactured by Analog Devices Inc./Maxim Integrated, designed for multi-channel data acquisition applications. This SAR (Successive Approximation Register) architecture device supports 4 or 8 input channels with configurable single-ended or differential input modes, communicating via SPI interface. The part is currently in active production status with full RoHS3 compliance and unlimited moisture sensitivity rating, making it suitable for industrial and commercial applications requiring reliable analog signal digitization.

Identifying equivalent and substitute parts is necessary when addressing supply chain constraints, inventory optimization, or design flexibility requirements while maintaining functional and electrical compatibility.

Substiute Parts

MAX1204BCPP+

Analog Devices Inc./Maxim IntegratedIn Stock: 966MAX1204BCPP+ Datasheet

Current PartRFQ

MAX1204BCPP+

Analog Devices Inc./Maxim IntegratedIn Stock: 966MAX1204BCPP+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX1204BCPP+ is determined by strict equivalence across the following critical parameters:

• Resolution: Must be 10 bits
• Input Channel Configuration: Must support 4 or 8 channels
• Input Mode Capability: Must support both differential and single-ended inputs
• Sampling Rate: Must be 133 kSPS
• Data Interface: Must be SPI
• Architecture: Must be SAR-based
• Supply Voltage Compatibility: Must support ±5V and 5V analog and digital supplies
• Reference Configuration: Must support both external and internal reference options
• Package: Must be 20-DIP form factor
• Mounting: Must be through-hole compatible
• Product Status: Must be active
• Compliance: Must maintain ROHS3 compliance

Based on the provided input data, the MAX1204BCPP+ is identified as both the main part and the direct substitute, indicating complete functional and electrical equivalence.

Parameter Comparison

Engineering Selection Recommendations

The MAX1204BCPP+ maintains active product status with full ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), confirming suitability for current design implementations. The part is REACH unaffected and classified under ECCN EAR99, meeting standard export and regulatory requirements for commercial applications.

Selection of this device is appropriate for applications requiring 10-bit resolution multi-channel analog-to-digital conversion with SPI interface compatibility. The through-hole 20-DIP package supports both prototype and production environments with standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the MAX1204BCPP+?

A: Substitutes must match all critical parameters: 10-bit resolution, 4 or 8 input channels, differential and single-ended input capability, 133 kSPS sampling rate, SPI interface, SAR architecture, ±5V/5V supply compatibility, external and internal reference support, 20-DIP package, through-hole mounting, active product status, and ROHS3 compliance.

Q: Is the MAX1204BCPP+ available in alternative package types?

A: The provided data specifies only the 20-DIP (0.300", 7.62mm) through-hole package. Alternative package options are not included in the current substitute list.

Q: Can the MAX1204BCPP+ be used in applications requiring extended temperature ranges?

A: The MAX1204BCPP+ is specified for 0°C to 70°C operation. Applications requiring extended temperature ranges would require alternative device selection outside the current specification.

Q: What is the significance of the SPI data interface for substitution?

A: The SPI interface is a critical substitution parameter. Any substitute must support SPI communication to ensure firmware and hardware compatibility without requiring design modifications.

Q: Does the internal reference option eliminate the need for external reference components?

A: The MAX1204BCPP+ supports both internal and external reference configurations. System design determines which reference type is implemented; both options are available within this device.