MAX110BCWE Equivalent & Substitute Parts

Part Overview

The MAX110BCWE is a 14-bit sigma-delta analog-to-digital converter manufactured by Analog Devices Inc./Maxim Integrated, designed for data acquisition applications requiring differential input processing. This device features 2 differential inputs, a single sigma-delta ADC architecture, and SPI data interface, operating from ±5V supply rails across a 0°C to 70°C temperature range in a 16-SOIC surface mount package.

The MAX110BCWE is classified as obsolete. Equivalent substitute parts are available to maintain design continuity and ensure component availability for production and maintenance applications.

Substiute Parts

MAX110BCWE

Analog Devices Inc./Maxim IntegratedIn Stock: 1145MAX110BCWE Datasheet

Current PartRFQ

MAX110BCWE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2361MAX110BCWE+ Datasheet

DirectRFQ

MAX110ACWE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2052MAX110ACWE+ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX110BCWE is determined by strict equivalence across all electrical and mechanical parameters. The substitute parts maintain identical specifications for resolution, sampling rate, input configuration, data interface, supply voltages, temperature range, and package form factor.

The following parameters establish substitution validity:

• 14-bit resolution
• 50 samples per second sampling rate
• 2 differential inputs
• SPI serial interface
• Sigma-delta architecture
• External reference configuration
• ±5V analog and digital supply requirements
• 0°C to 70°C operating temperature
• 16-SOIC surface mount package

Parameter Comparison

Engineering Selection Recommendations

The MAX110BCWE is obsolete and no longer in active production. For new designs and ongoing production requirements, MAX110BCWE+ and MAX110ACWE+ are direct functional equivalents with identical electrical and mechanical specifications.

MAX110BCWE+ is the direct successor to MAX110BCWE, maintaining the same part number suffix structure while achieving ROHS3 compliance and active product status. This part is recommended as the primary substitute for MAX110BCWE applications.

MAX110ACWE+ is a parametric equivalent offering identical functional performance and ROHS3 compliance. This part provides an alternative source option with equivalent specifications.

Both substitute parts are supplied in tube packaging and maintain full compatibility with existing MAX110BCWE circuit designs, PCB layouts, and assembly processes. The transition from RoHS non-compliant to ROHS3 compliant status reflects current manufacturing standards without affecting electrical performance or pin configuration.

Frequently Asked Questions (FAQ)

Q: Can MAX110BCWE+ directly replace MAX110BCWE in existing designs?

A: Yes. MAX110BCWE+ is electrically and mechanically identical to MAX110BCWE across all specified parameters. No circuit modifications or PCB layout changes are required. The primary difference is ROHS3 compliance status and active product availability.

Q: What is the difference between MAX110BCWE+ and MAX110ACWE+?

A: Both parts are parametric equivalents with identical electrical specifications and package form factors. The difference lies in the part number designation (B versus A suffix). Both are ROHS3 compliant and actively produced. Selection between these parts depends on supplier availability and procurement requirements.

Q: Are there any compatibility concerns when substituting MAX110BCWE with MAX110BCWE+ or MAX110ACWE+?

A: No compatibility concerns exist. All three parts share identical pin configurations, electrical characteristics, supply voltage requirements, operating temperature ranges, and package dimensions. Direct substitution is supported without design modifications.

Q: What packaging formats are available for substitute parts?

A: MAX110BCWE+ and MAX110ACWE+ are supplied in tube packaging, whereas MAX110BCWE was supplied in bulk packaging. Tube packaging provides improved component protection and traceability for production environments.

Q: Are the substitute parts suitable for applications requiring RoHS compliance?

A: Yes. Both MAX110BCWE+ and MAX110ACWE+ are ROHS3 compliant, meeting current environmental and regulatory requirements for electronic component manufacturing and assembly.