MAN6960 LED 7-Segment Display - Equivalent & Substitute Parts

Part Overview

The MAN6960 is a single-character red 7-segment LED display manufactured by Everlight Electronics Co Ltd. This common anode display module is designed for numeric and alphanumeric applications requiring a 0.56-inch character height. The part is currently active in production with 756 units in stock.

Substitute parts are identified when equivalent functional performance can be achieved within the specified electrical and mechanical parameters of the 7-segment display category. Alternative models may be required due to inventory availability, lead time considerations, or specific application constraints related to physical dimensions or electrical characteristics.

Substiute Parts

MAN6960

Everlight Electronics Co LtdIn Stock: 818MAN6960 Datasheet

Current PartRFQ

SA52-11EWA

KingbrightIn Stock: 2998SA52-11EWA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAN6960 is determined by strict adherence to the following critical parameters:

Mandatory Matching Criteria:

• Display Type: 7-Segment configuration
• Number of Characters: Single character (1)
• Common Pin Configuration: Common Anode
• Color: Red
• Package / Case: 10-DIP (0.600", 15.24mm) footprint

Allowable Parameter Variations:

• Digit/Alpha Size: Within 0.04" (1.01mm) tolerance of 0.56" specification
• Voltage - Forward (Vf): Operating range 2.0V to 2.5V
• Current - Test: 20mA standard specification
• Physical Dimensions: Minor variations acceptable within DIP package constraints
• Wavelength - Peak: Red spectrum range (620nm to 640nm)
• Millicandela Rating: Brightness variations permitted for equivalent optical performance
• Power Dissipation: Variations within thermal management capability

The SA52-11EWA manufactured by Kingbright meets all mandatory matching criteria and operates within allowable parameter variations, qualifying it as a direct substitute for the MAN6960.

Parameter Comparison

Engineering Selection Recommendations

Both the MAN6960 and SA52-11EWA are active production parts with ROHS3 compliance and MSL Level 1 rating, indicating full environmental and regulatory compatibility for industrial and commercial applications.

The MAN6960 operates at a maximum forward voltage of 2.5V with a power dissipation rating of 600mW. The SA52-11EWA operates at 2V with significantly lower power dissipation of 75mW, resulting in reduced thermal load and improved energy efficiency in circuit designs.

The SA52-11EWA provides higher brightness output at 6.4mcd compared to the MAN6960 at 2.2mcd, while consuming substantially less power. The digit height difference of 0.04 inches (1.01mm) between the two parts falls within acceptable tolerance for most display applications where visual consistency is not critical.

Both parts share identical 10-DIP packaging and footprint specifications, ensuring direct PCB compatibility without layout modifications. The wavelength difference of 8nm between the two parts (635nm versus 627nm) remains within the red spectrum and produces visually equivalent color output.

Frequently Asked Questions (FAQ)

Q: Can the SA52-11EWA replace the MAN6960 in existing circuit designs?

A: Yes. Both parts are common anode 7-segment displays with identical 10-DIP package footprints and 20mA test current specifications. The SA52-11EWA operates within the voltage range of the MAN6960 (2V versus 2.5V maximum) and shares the same pin configuration. No circuit modifications are required for direct substitution.

Q: What is the significance of the 0.04-inch digit height difference?

A: The MAN6960 features a 0.56-inch character height while the SA52-11EWA is 0.52 inches. This 0.04-inch (1.01mm) difference represents approximately 7% variation in display size. For applications where visual uniformity across multiple displays is required, this difference should be considered. For single-display applications or where size variation is acceptable, this difference is not functionally significant.

Q: Why does the SA52-11EWA have lower power dissipation despite higher brightness?

A: The SA52-11EWA is rated at 75mW maximum power dissipation compared to the MAN6960 at 600mW. The SA52-11EWA achieves higher brightness output (6.4mcd versus 2.2mcd) through improved LED efficiency rather than increased power consumption. This represents superior semiconductor design and manufacturing in the Kingbright part.

Q: Are there any compliance or certification differences between these parts?

A: Both parts are ROHS3 compliant and carry MSL Level 1 (Unlimited) moisture sensitivity ratings. Both are classified under ECCN EAR99 and HTSUS 8541.41.0000. No compliance or certification differences exist between the two parts.

Q: What is the wavelength difference between the two displays?

A: The MAN6960 has a peak wavelength of 635nm while the SA52-11EWA is 627nm. Both wavelengths fall within the red spectrum range. The 8nm difference produces no perceptible color variation to the human eye and both displays will appear red in standard applications.

Q: Can these parts be used interchangeably in high-brightness applications?

A: The SA52-11EWA is the superior choice for high-brightness requirements, delivering 6.4mcd compared to the MAN6960 at 2.2mcd. The SA52-11EWA provides approximately 3 times greater brightness output while consuming significantly less power, making it the preferred selection for visibility-critical applications.

Q: What packaging format is used for the SA52-11EWA?

A: The SA52-11EWA is supplied in Tube packaging, while the MAN6960 packaging format is not specified in the provided data. Both parts use identical 10-DIP (0.600", 15.24mm) case specifications for component mounting and circuit board integration.