MAN6760 LED 7-Segment Display - Equivalent & Substitute Parts

Part Overview

The MAN6760 is a single-character red 7-segment LED display module manufactured by Everlight Electronics Co Ltd. This common anode display operates at a maximum forward voltage of 2V with a test current of 20mA, housed in a 10-DIP package measuring 0.750" H x 0.480" W x 0.315" D. The product is currently active and RoHS3 compliant. Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing, inventory constraints, or when specific electrical performance characteristics align with application parameters.

Substiute Parts

MAN6760

Everlight Electronics Co LtdIn Stock: 1112MAN6760 Datasheet

Current PartRFQ

HDSP-H101

Broadcom LimitedIn Stock: 3092HDSP-H101 Datasheet

SimilarRFQ

HDSP-H151

Broadcom LimitedIn Stock: 1764HDSP-H151 Datasheet

SimilarRFQ

LAP-601VB

Rohm SemiconductorIn Stock: 913LAP-601VB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MAN6760 are qualified based on the following criteria:

Mandatory Compatibility Parameters:

• Display Type: 7-Segment
• Number of Characters: 1
• Common Pin Configuration: Common Anode
• Color: Red
• Package Type: 10-DIP (0.600", 15.24mm)
• Digit/Alpha Size: 0.56" nominal

Electrical Performance Parameters: Substitute parts must operate within compatible voltage and current ranges. The MAN6760 operates at 2V (Max) forward voltage with 20mA test current. Substitute parts with lower forward voltage (1.7V to 1.9V) and reduced test current (5mA to 10mA) are acceptable as they represent lower power consumption variants. The HDSP-H151 at 1.8V/20mA matches the test current specification exactly.

Wavelength Compatibility: Peak wavelength specifications (645nm to 650nm) fall within the red LED spectrum and are interchangeable for visual display applications.

Compliance and Environmental: All substitute parts maintain ROHS3 compliance and MSL ratings suitable for standard handling and storage conditions.

Parameter Comparison

Engineering Selection Recommendations

HDSP-H151 (Broadcom Limited) is the primary substitute for direct replacement applications. This part matches the MAN6760 in test current specification (20mA) and maintains identical package configuration. The forward voltage of 1.8V is within acceptable operating range for common anode 7-segment display circuits. ROHS3 compliance and MSL 1 rating ensure compatibility with standard manufacturing and storage protocols. The HDSP-H151 is suitable for applications where the MAN6760 is unavailable or when Broadcom sourcing is preferred.

HDSP-H101 (Broadcom Limited) serves as a low-power alternative. Operating at 1.7V forward voltage with 5mA test current, this part reduces power consumption by 75% compared to the MAN6760. The HDSP-H101 is appropriate for battery-powered or energy-constrained applications where reduced brightness (0.42mcd to 4.2mcd) is acceptable. ROHS3 compliance and MSL 1 rating apply.

LAP-601VB (Rohm Semiconductor) provides a high-brightness alternative with 36mcd rating. Operating at 1.9V forward voltage with 10mA test current, this part offers intermediate power consumption. Physical dimensions closely match the MAN6760 (0.748" H vs 0.750" H). The LAP-601VB carries MSL 3 rating, requiring controlled storage conditions (168 hours maximum at 60% relative humidity and 30°C). ROHS3 compliance is maintained. This part is suitable for applications requiring enhanced display brightness.

All substitute parts maintain active product status and ROHS3 compliance, ensuring long-term availability and regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can the HDSP-H101 replace the MAN6760 in existing circuit designs?

A: The HDSP-H101 is electrically compatible as a common anode 7-segment display in 10-DIP package. However, the reduced test current (5mA vs 20mA) and lower brightness (4.2mcd vs 0.42mcd) require circuit verification. Current-limiting resistor values must be recalculated for the 1.7V forward voltage specification. Visual brightness differences will be apparent in the application.

Q: What is the primary difference between HDSP-H151 and HDSP-H101?

A: Both are Broadcom 7-segment displays in identical packages. The HDSP-H151 operates at 1.8V/20mA with 16mcd brightness, matching the MAN6760 test current specification. The HDSP-H101 operates at 1.7V/5mA with 4.2mcd brightness, consuming significantly less power. Select HDSP-H151 for direct current-matched replacement; select HDSP-H101 for low-power applications.

Q: Are physical dimension differences between substitute parts significant?

A: The MAN6760 measures 0.750" H x 0.480" W. The Broadcom parts (HDSP-H101, HDSP-H151) measure 0.670" H x 0.495" W. The LAP-601VB measures 0.748" H x 0.492" W. All share identical 10-DIP package footprint and 0.315" depth. Height differences (0.080" for Broadcom, 0.002" for Rohm) may affect bezel clearance in mechanical assemblies. Verify PCB layout and enclosure fit before substitution.

Q: Does MSL rating affect part selection?

A: The MAN6760, HDSP-H101, and HDSP-H151 carry MSL 1 (Unlimited) ratings, allowing indefinite storage without moisture control. The LAP-601VB carries MSL 3 (168 Hours), requiring controlled storage at 60% relative humidity and 30°C maximum. For high-volume manufacturing or extended inventory holding, MSL 1 parts are preferred. MSL 3 parts require bake-out procedures before reflow soldering if storage limits are exceeded.

Q: Which substitute part offers the best brightness performance?

A: The LAP-601VB provides the highest brightness at 36mcd, followed by HDSP-H151 at 16mcd, HDSP-H101 at 4.2mcd, and MAN6760 at 0.42mcd. Select based on application visibility requirements and ambient lighting conditions. Higher brightness parts consume more power and generate more heat.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The MAN6760, HDSP-H101, HDSP-H151, and LAP-601VB are all ROHS3 compliant, meeting EU Directive 2011/65/EU requirements for restricted hazardous substances.