MAN6610 Equivalent & Substitute Parts

Part Overview

The MAN6610 is a 7-segment dual character LED display module manufactured by onsemi, featuring orange color output with common anode configuration. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The display operates at 2.5V maximum forward voltage with 20mA test current and delivers 2.2mcd brightness in the 630nm wavelength range. Its 0.56" character size and 18-DIP package make it suitable for legacy numeric display applications requiring compact form factors.

Substiute Parts

MAN6610

onsemiIn Stock: 1056MAN6610 Datasheet

Current PartRFQ

DA56-11EWA

KingbrightIn Stock: 1172DA56-11EWA Datasheet

SimilarRFQ

LBP-602DA2

Rohm SemiconductorIn Stock: 999LBP-602DA2 Datasheet

SimilarRFQ

LTD-6610E

Lite-On Inc.In Stock: 1180LTD-6610E Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MAN6610 are selected based on strict compatibility criteria derived from the provided parameters. The primary substitution logic is based on the following key parameters:

• Display Configuration: 2-character, 7-segment, common anode architecture
• Package Type: 18-DIP (0.600", 15.24mm) form factor
• Character Size: 0.56" (14.22mm) digit height
• Electrical Operating Range: Forward voltage between 1.9V–2.5V and test current between 10mA–20mA
• Physical Dimensions: Height 0.750", width 0.984"–0.985", depth 0.315"
• Wavelength Range: 605nm–630nm (orange to orange-red spectrum)

Three substitute parts meet these criteria: DA56-11EWA (Kingbright), LBP-602DA2 (Rohm Semiconductor), and LTD-6610E (Lite-On Inc.). Each maintains the core 18-DIP common anode architecture and 0.56" character size. Variations in color (red vs. orange-red), forward voltage, test current, and brightness are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain active product status, ensuring long-term availability and supply chain stability compared to the obsolete MAN6610. Selection among substitutes depends on specific application requirements:

LTD-6610E (Lite-On Inc.) provides the closest electrical and optical match to the MAN6610, with identical 20mA test current, 2V forward voltage, and 630nm wavelength peak. Orange-red color output aligns with the original orange specification. ROHS3 compliance and active status support modern design requirements.

LBP-602DA2 (Rohm Semiconductor) operates at the lowest forward voltage (1.9V) and test current (10mA), resulting in reduced power dissipation (896mW vs. 1.2W). This part delivers significantly higher brightness (250mcd vs. 2.2mcd) and maintains orange color output. ROHS3 compliance is confirmed.

DA56-11EWA (Kingbright) features red color output with 627nm wavelength, differing from the original orange specification. It maintains 20mA test current and 2V forward voltage. Brightness is elevated at 8mcd. ROHS3 compliance is confirmed. This option is suitable only when red color substitution is acceptable.

All three parts carry REACH Unaffected status and MSL 1 (Unlimited) moisture sensitivity rating, matching the original component's environmental specifications.

Frequently Asked Questions (FAQ)

Q: Can I use DA56-11EWA as a direct replacement for MAN6610?

A: DA56-11EWA is mechanically and electrically compatible in terms of package (18-DIP), pin configuration (common anode), and character count (2-character 7-segment). However, the color output differs: DA56-11EWA produces red (627nm) while MAN6610 produces orange (630nm). Use this substitute only if red color output is acceptable in your application.

Q: What are the key differences between LBP-602DA2 and the original MAN6610?

A: LBP-602DA2 operates at lower forward voltage (1.9V vs. 2.5V) and reduced test current (10mA vs. 20mA), resulting in lower power dissipation. Brightness is significantly higher (250mcd vs. 2.2mcd). Physical dimensions are nearly identical, and the 18-DIP package, common anode configuration, and orange color match the original. Circuit design may require current-limiting resistor adjustment due to the lower forward voltage.

Q: Is LTD-6610E the best substitute for the MAN6610?

A: LTD-6610E provides the closest electrical and optical performance match, with identical test current (20mA), similar forward voltage (2V vs. 2.5V), and matching wavelength peak (630nm). Color output is orange-red, closely approximating the original orange. All three substitutes are valid; selection depends on whether color, brightness, or power dissipation characteristics are critical to your application.

Q: Are all substitute parts RoHS compliant?

A: Yes. LBP-602DA2, DA56-11EWA, and LTD-6610E are all ROHS3 compliant. The original MAN6610 RoHS status is not specified in the provided data. All four parts carry REACH Unaffected status.

Q: Can I use these substitutes in existing PCB designs without modification?

A: All substitute parts use the same 18-DIP (0.600", 15.24mm) package and common anode pin configuration as the MAN6610, allowing direct socket compatibility. Physical dimensions are nearly identical (height 0.748"–0.750", width 0.984"–0.985", depth 0.315"). However, differences in forward voltage and test current may require adjustment of current-limiting resistors in the display driver circuit, particularly for LBP-602DA2 (1.9V forward voltage).

Q: Which substitute offers the longest product lifecycle?

A: All three substitutes carry active product status, indicating ongoing manufacturer support. LBP-602DA2 (Rohm Semiconductor), DA56-11EWA (Kingbright), and LTD-6610E (Lite-On Inc.) are all established manufacturers with strong market presence. Product lifecycle information beyond active status is not provided in the available data.