MAN6410 Equivalent & Substitute Parts

Part Overview

The MAN6410 is a dual-character 7-segment LED display module manufactured by onsemi, featuring a 0.56" green display with common anode configuration. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and production continuity. The display operates at 2.1V forward voltage with 20mA test current and is housed in an 18-DIP package measuring 0.600" pitch.

Substiute Parts

MAN6410

onsemiIn Stock: 1038MAN6410 Datasheet

Current PartRFQ

DA56-11GWA

KingbrightIn Stock: 1836DA56-11GWA Datasheet

SimilarRFQ

LTD-6410G

Lite-On Inc.In Stock: 698LTD-6410G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MAN6410 is determined by strict equivalence across the following parameters:

• Display Configuration: 2-character, 7-segment, common anode topology
• Physical Package: 18-DIP with 0.600" (15.24mm) pitch
• Electrical Specifications: Forward voltage range 2.1V–2.2V, test current 20mA
• Optical Properties: Green color, 565nm peak wavelength
• Physical Dimensions: Height 0.750", width approximately 0.984"–0.985", depth 0.315"

Substitute parts must maintain identical pin configuration, package footprint, and electrical operating parameters to ensure direct replacement without circuit redesign.

Parameter Comparison

Engineering Selection Recommendations

DA56-11GWA (Kingbright) is the primary substitute for MAN6410. This part maintains electrical equivalence with a forward voltage of 2.2V, which is within acceptable tolerance of the original 2.1V specification. The DA56-11GWA is currently in active production status and holds ROHS3 compliance certification. REACH status is unaffected, supporting unrestricted use in regulated markets.

LTD-6410G (Lite-On Inc.) provides an alternative substitute with exact forward voltage matching (2.1V) and active product status. This part is ROHS3 compliant; however, REACH status is affected, requiring verification of regulatory applicability for specific end-use applications and geographic markets.

Both substitute parts are mechanically and electrically compatible with the MAN6410 footprint and pin configuration. Selection between DA56-11GWA and LTD-6410G should be based on supply chain availability, regulatory compliance requirements, and REACH applicability for the target market.

Frequently Asked Questions (FAQ)

Q: Can DA56-11GWA replace MAN6410 directly without circuit modification?

A: Yes. The DA56-11GWA maintains identical 18-DIP package footprint, pin configuration, and electrical operating parameters (20mA test current, 565nm wavelength, common anode topology). The forward voltage difference of 0.1V (2.2V vs. 2.1V) is within standard LED tolerance ranges and does not require circuit redesign.

Q: What is the difference between DA56-11GWA and LTD-6410G?

A: Both parts are electrically and mechanically equivalent to MAN6410. The primary differences are: (1) DA56-11GWA has forward voltage of 2.2V; LTD-6410G matches the original 2.1V specification; (2) DA56-11GWA has REACH unaffected status; LTD-6410G has REACH affected status, requiring regulatory verification for certain markets.

Q: Are there any physical dimension variations between the substitute parts and the original MAN6410?

A: Width dimensions show minimal variation: MAN6410 is 0.985" wide, while both DA56-11GWA and LTD-6410G are 0.984" wide. This 0.001" difference is within standard manufacturing tolerance and does not affect PCB footprint compatibility or mechanical fit.

Q: What is the significance of the obsolete status of MAN6410?

A: Obsolete status indicates that onsemi has discontinued production and support for this part. Substitute parts with active status (DA56-11GWA and LTD-6410G) ensure long-term supply chain continuity and access to current manufacturing batches with updated compliance certifications.

Q: Do the substitute parts meet current regulatory compliance standards?

A: Both DA56-11GWA and LTD-6410G are ROHS3 compliant. DA56-11GWA has REACH unaffected status, supporting unrestricted use. LTD-6410G has REACH affected status; compliance verification is required based on specific application and geographic market requirements.