MAN6080 Equivalent & Substitute Parts

Part Overview

The MAN6080 is a 7-segment LED display module manufactured by onsemi, featuring a single red character with 0.56" digit height in a 10-DIP package configuration. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and production continuity. The display operates as a common cathode device with a typical forward voltage of 1.8V and test current of 20mA, suitable for numeric and alphanumeric display applications requiring compact form factors.

Substiute Parts

MAN6080

onsemiIn Stock: 1151MAN6080 Datasheet

Current PartRFQ

HDSP-H103

Broadcom LimitedIn Stock: 2171HDSP-H103 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAN6080 is determined by strict alignment of the following critical parameters:

• Display Type: 7-Segment configuration
• Number of Characters: Single character (1)
• Digit/Alpha Size: 0.56" (14.22mm) nominal dimension
• Common Pin Configuration: Common Cathode topology
• Package / Case: 10-DIP (0.600", 15.24mm) footprint
• Color: Red LED emission
• Moisture Sensitivity Level: MSL 1 (Unlimited)

The HDSP-H103 manufactured by Broadcom Limited meets all substitution criteria. Both devices share identical digit height, common cathode configuration, 10-DIP package footprint, and MSL rating. Electrical parameters (forward voltage, test current, wavelength) fall within acceptable operating ranges for equivalent functionality in display applications.

Parameter Comparison

Engineering Selection Recommendations

The HDSP-H103 is the qualified substitute for the MAN6080 based on the following factors:

• Product Status: The HDSP-H103 maintains Active status, ensuring continued availability and manufacturing support, whereas the MAN6080 is Obsolete.
• Compliance: Both devices carry identical Moisture Sensitivity Level (MSL 1) and REACH Unaffected status, confirming equivalent environmental handling and regulatory compliance.
• Electrical Compatibility: Forward voltage differential (1.8V vs. 1.7V) and test current variation (20mA vs. 5mA) are within acceptable operating margins for common cathode 7-segment display applications. Peak wavelength difference (650nm vs. 645nm) remains within the red spectrum range.
• Package Footprint: Identical 10-DIP (0.600", 15.24mm) package ensures direct mechanical and electrical compatibility without PCB redesign.

Frequently Asked Questions (FAQ)

Q: Can the HDSP-H103 replace the MAN6080 in existing designs?

A: Yes. Both devices share identical digit height (0.56"), common cathode configuration, and 10-DIP package footprint. Electrical parameters are compatible for standard display applications.

Q: What is the significance of the forward voltage difference (1.8V vs. 1.7V)?

A: The 0.1V difference is within normal operating tolerance for LED display circuits. Circuit designs accommodating the MAN6080's 1.8V specification will operate the HDSP-H103 within acceptable parameters.

Q: Does the test current difference (20mA vs. 5mA) affect substitution?

A: Test current ratings indicate measurement conditions, not operational requirements. Both devices operate at the same maximum power dissipation (37mW), confirming equivalent thermal and electrical performance in application circuits.

Q: Are there packaging differences between these parts?

A: The MAN6080 is supplied in standard packaging, while the HDSP-H103 is supplied in Tube packaging. Both maintain identical MSL 1 (Unlimited) moisture sensitivity ratings and 10-DIP footprint specifications.

Q: Why is product status important for substitution?

A: The MAN6080's Obsolete status indicates discontinued manufacturing. The HDSP-H103's Active status ensures ongoing availability, supply chain reliability, and manufacturer support for production applications.