MAN6060 Red 7-Segment LED Display - Equivalent & Substitute Parts

Part Overview

The MAN6060 is a single-character red 7-segment LED display manufactured by onsemi, featuring a 0.56" digit height in a 10-DIP package configuration. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production requirements. The display operates at 1.8V forward voltage with 20mA test current and delivers 3.9mcd brightness output at 650nm wavelength peak.

Substiute Parts

MAN6060

onsemiIn Stock: 986MAN6060 Datasheet

Current PartRFQ

HDSP-H151

Broadcom LimitedIn Stock: 1764HDSP-H151 Datasheet

SimilarRFQ

LAP-601VB

Rohm SemiconductorIn Stock: 913LAP-601VB Datasheet

SimilarRFQ

LDS-A5644RI

Lumex Opto/Components Inc.In Stock: 1206LDS-A5644RI Datasheet

SimilarRFQ

SA56-11EWA

KingbrightIn Stock: 3507SA56-11EWA Datasheet

SimilarRFQ

XDMR14A

SunLEDIn Stock: 829XDMR14A Datasheet

SimilarRFQ

XDUR14A

SunLEDIn Stock: 6986XDUR14A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MAN6060 are qualified based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

• Display Type: 7-Segment (all substitutes must be 7-segment displays)
• Number of Characters: 1 (single character only)
• Common Pin Configuration: Common Anode (all substitutes must use common anode architecture)
• Package / Case: 10-DIP (0.600", 15.24mm) (identical DIP footprint required)
• Digit/Alpha Size: 0.56" (14.22mm) nominal (visual consistency requirement)

Secondary Electrical Parameters (allowable variance):

• Voltage - Forward (Vf): 1.8V to 2.0V range (within typical LED forward voltage tolerance)
• Current - Test: 10mA to 20mA (standard test current range for this display class)
• Wavelength - Peak: 627nm to 660nm (red spectrum range)
• Millicandela Rating: 4.6mcd to 36mcd (brightness variation acceptable based on application requirements)

All five substitute parts meet these criteria and maintain identical mechanical footprint and electrical interface compatibility with the MAN6060.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Minimum Design Changes):

HDSP-H151 (Broadcom Limited) and XDUR14A (SunLED) are the primary substitutes. Both maintain identical forward voltage (1.8V-1.9V range), matching test current specifications, and active product status. HDSP-H151 is ROHS3 compliant with unlimited MSL rating. XDUR14A is also ROHS3 compliant with unlimited MSL and offers the highest inventory availability (6960 pcs).

For Applications Requiring Lower Power Consumption:

LDS-A5644RI (Lumex Opto/Components Inc.), XDMR14A (SunLED), and XDUR14A (SunLED) operate at 10mA test current, reducing power dissipation compared to the MAN6060's 20mA specification. All three are ROHS3 compliant with unlimited MSL ratings.

For Applications Requiring Higher Brightness:

LAP-601VB (Rohm Semiconductor) delivers 36mcd brightness output, the highest among all substitutes. This part operates at 1.9V forward voltage and 10mA test current. Note that LAP-601VB has MSL rating of 3 (168 Hours), requiring controlled storage conditions.

Compliance Considerations:

All active substitute parts are ROHS3 compliant. The MAN6060 and XDMR14A are obsolete; active alternatives should be prioritized for new designs. All parts maintain REACH Unaffected status and EAR99 ECCN classification.

Frequently Asked Questions (FAQ)

Q: Can I use any of these substitutes as a direct drop-in replacement for the MAN6060?

A: Yes, all seven parts share identical 10-DIP package footprint and common anode configuration. Electrical interface compatibility is maintained across the 1.8V to 2.0V forward voltage range and 10mA to 20mA test current specifications. No PCB modifications are required.

Q: What is the difference between the MAN6060 and HDSP-H151?

A: Both operate at 1.8V forward voltage and 20mA test current with identical package footprint. The HDSP-H151 delivers higher brightness (16mcd vs 3.9mcd) and is active product status versus obsolete. Physical dimensions vary slightly (0.670" H vs 0.750" H), though digit size remains 0.56".

Q: Which substitute offers the best long-term availability?

A: XDUR14A (SunLED) has the highest current inventory (6960 pcs) and active product status, ensuring continued availability. HDSP-H151 (Broadcom) and SA56-11EWA (Kingbright) also maintain active status with substantial inventory levels (1690 pcs and 3458 pcs respectively).

Q: Are there any moisture sensitivity concerns with these substitutes?

A: LAP-601VB (Rohm) has MSL rating of 3 (168 Hours), requiring controlled storage and handling. All other substitutes, including the original MAN6060, have MSL rating of 1 (Unlimited), allowing standard storage conditions.

Q: What is the brightness difference between substitutes?

A: Millicandela ratings range from 4.6mcd (LDS-A5644RI) to 36mcd (LAP-601VB). The MAN6060 operates at 3.9mcd. Higher brightness substitutes (LAP-601VB at 36mcd, XDMR14A at 34mcd) may require circuit current limiting adjustments to prevent over-driving the display.

Q: Do all substitutes support the same wavelength?

A: Wavelength peak varies from 627nm to 660nm across all parts, all within the red spectrum. The MAN6060 operates at 650nm. Wavelength differences may result in slight color perception variations but do not affect functional compatibility.

Q: Which substitute has the lowest power consumption?

A: LDS-A5644RI, XDMR14A, and XDUR14A all operate at 10mA test current with maximum power dissipation of 75mW to 105mW, compared to the MAN6060's 37mW at 20mA. Actual power consumption depends on circuit design and operating current.