MAN5H60 7-Segment LED Display - Equivalent & Substitute Parts

Part Overview

The MAN5H60 is a single-character red 7-segment LED display module manufactured by onsemi, featuring a 0.51" digit height in a 10-DIP package configuration. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and production continuity. The display operates at 2.05V forward voltage with 20mA test current and delivers 7.8mcd brightness output at 632nm wavelength peak.

Substiute Parts

MAN5H60

onsemiIn Stock: 995MAN5H60 Datasheet

Current PartRFQ

HDSP-563C

Broadcom LimitedIn Stock: 4326HDSP-563C Datasheet

SimilarRFQ

LAP-601VL

Rohm SemiconductorIn Stock: 1223LAP-601VL Datasheet

SimilarRFQ

LDS-C5644RI

Lumex Opto/Components Inc.In Stock: 707LDS-C5644RI Datasheet

SimilarRFQ

LSHD-5503

Lite-On Inc.In Stock: 2654LSHD-5503 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MAN5H60 are qualified based on the following critical parameters:

• Display Configuration: Single-character 7-segment red LED display
• Common Pin Type: Common cathode architecture
• Package Type: 10-DIP form factor
• Electrical Compatibility: Forward voltage range 1.9V to 2.1V; test current 10mA to 20mA
• Physical Compatibility: Digit height 0.51" to 0.58"; overall dimensions within tolerance for standard PCB mounting
• Regulatory Compliance: REACH and RoHS status for production environments

The following substitute parts meet these criteria with active product status and current manufacturing availability.

Parameter Comparison

Engineering Selection Recommendations

HDSP-563C (Broadcom Limited) provides the closest electrical and mechanical match to the MAN5H60. This part maintains identical package dimensions (10-DIP 0.600"), digit height (0.51"), and test current (20mA). Forward voltage is 0.15V lower at 1.9V, and brightness output is significantly higher at 18mcd to 36mcd. The part carries active product status with ROHS3 compliance and REACH unaffected certification, supporting long-term production availability.

LSHD-5503 (Lite-On Inc.) offers electrical parameters closely aligned with the MAN5H60, with 2.1V forward voltage and 20mA test current. Physical dimensions differ slightly with 0.56" digit height and 10-DIP 0.600" package. Brightness output of 17mcd and 632nm wavelength match the original specification closely. This part carries ROHS3 compliance but is subject to REACH regulations.

LDS-C5644RI (Lumex Opto/Components Inc.) and LAP-601VL (Rohm Semiconductor) represent alternatives with larger digit heights (0.56" and 0.58" respectively) and reduced test current (10mA). These parts are suitable for applications where increased digit visibility is acceptable and lower power consumption is beneficial. Both carry ROHS3 compliance and REACH unaffected or affected status.

Frequently Asked Questions (FAQ)

Q: Can HDSP-563C directly replace MAN5H60 without circuit modification?

A: HDSP-563C maintains identical package footprint (10-DIP 0.600"), digit height (0.51"), and test current (20mA). The 0.15V lower forward voltage (1.9V vs 2.05V) requires verification of current-limiting resistor values in the existing circuit design. No PCB layout changes are necessary.

Q: What is the primary difference between HDSP-563C and LSHD-5503?

A: Both parts operate at 20mA test current and use 10-DIP 0.600" packages. HDSP-563C features 0.51" digit height with 18mcd to 36mcd brightness, while LSHD-5503 provides 0.56" digit height with 17mcd brightness. HDSP-563C carries REACH unaffected status; LSHD-5503 is REACH affected.

Q: Are LAP-601VL and LDS-C5644RI suitable for direct substitution?

A: Both parts operate at reduced test current (10mA) and feature larger digit heights (0.58" and 0.56" respectively). Physical dimensions differ from the MAN5H60, requiring PCB layout verification. These parts are suitable for applications where increased visibility and lower power consumption are acceptable trade-offs.

Q: What compliance certifications should be verified for production use?

A: All substitute parts carry MSL 1 (Unlimited) moisture sensitivity rating. HDSP-563C, LAP-601VL, and LDS-C5644RI are ROHS3 compliant with REACH unaffected status. LSHD-5503 is ROHS3 compliant but REACH affected. Verify compliance requirements against your production and distribution regions.

Q: How do brightness ratings affect circuit design?

A: MAN5H60 delivers 7.8mcd at 2.05V and 20mA. HDSP-563C provides 18mcd to 36mcd at 1.9V and 20mA, requiring no current adjustment. LSHD-5503 delivers 17mcd at 2.1V and 20mA. LAP-601VL and LDS-C5644RI operate at 10mA, reducing brightness output to 36mcd and 3.9mcd respectively. Verify brightness requirements for your application before selection.

Q: What packaging considerations apply to these substitutes?

A: MAN5H60, HDSP-563C, LDS-C5644RI, and LSHD-5503 use standard 10-DIP 0.600" (15.24mm) spacing, compatible with existing PCB designs. LAP-601VL uses 10-DIP 0.400" (10.16mm) spacing, requiring PCB layout modification. Verify pin spacing against your PCB design before component procurement.