MALSECL00AG322FARK Equivalent & Substitute Parts

Part Overview

The MALSECL00AG322FARK is a 220 µF, 35 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Vishay Beyschlag/Draloric/BC Components. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing design support and procurement. The part operates across a temperature range of -40°C to 105°C with a 2000-hour lifetime rating at 105°C, suitable for general-purpose applications requiring stable capacitance and low equivalent series resistance.

Substiute Parts

MALSECL00AG322FARK

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 977MALSECL00AG322FARK Datasheet

Current PartRFQ

227SVH050MGE

Cornell Dubilier / Illinois CapacitorIn Stock: 1232227SVH050MGE Datasheet

UpgradeRFQ

227SVL035MGW

Cornell Dubilier / Illinois CapacitorIn Stock: 779227SVL035MGW Datasheet

UpgradeRFQ

ATB227M035

Cornell Dubilier / Illinois CapacitorIn Stock: 32893ATB227M035 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MALSECL00AG322FARK is determined by strict equivalence in the following parameters:

• Capacitance: 220 µF (exact match required)
• Tolerance: ±20% (exact match required)
• Voltage Rating: 35 V minimum (equal or higher voltage rating acceptable)
• Package / Case: Radial, Can - SMD (exact match required)
• Size / Dimension: 0.394" Dia (10.00 mm) (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Polarization: Polar (exact match required)
• RoHS Status: ROHS3 Compliant (compliance maintained)

Three substitute parts meet these criteria: 227SVH050MGE (50 V rated), 227SVL035MGW (35 V rated), and ATB227M035 (35 V rated). All three maintain identical capacitance, tolerance, package geometry, and surface mount configuration while offering enhanced performance characteristics or extended operational lifetimes.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain ROHS3 compliance and MSL Level 1 rating, ensuring compatibility with current manufacturing and environmental standards.

227SVH050MGE provides a higher voltage rating (50 V) while maintaining the 2000-hour lifetime specification. This part is suitable for applications where elevated voltage margin is beneficial without requiring extended operational lifetime.

227SVL035MGW and ATB227M035 both offer extended 5000-hour lifetime ratings at 105°C, doubling the operational duration of the original part. Both support expanded operating temperature ranges (-55°C to 105°C). ATB227M035 provides superior ripple current handling at both 120 Hz (595 mA) and 100 kHz (850 mA) frequencies, making it optimal for high-ripple applications. The ATB227M035 surface mount land size (0.425" L x 0.413" W) differs slightly from the original specification and requires PCB layout verification.

227SVL035MGW maintains closer dimensional alignment with the original part while offering the extended lifetime benefit, making it suitable for direct replacement in space-constrained designs.

Frequently Asked Questions (FAQ)

Q: Can 227SVH050MGE be used in place of MALSECL00AG322FARK?

A: Yes. The 227SVH050MGE is electrically and mechanically compatible. The higher 50 V rating provides additional voltage margin while maintaining identical capacitance, tolerance, package geometry, and surface mount configuration. The 2000-hour lifetime matches the original specification.

Q: What is the primary advantage of ATB227M035 over the original part?

A: ATB227M035 offers a 5000-hour lifetime at 105°C (2.5× longer than the original 2000-hour rating) and superior ripple current capability (595 mA @ 120 Hz and 850 mA @ 100 kHz). It also supports an extended operating temperature range of -55°C to 105°C. The surface mount land size is slightly larger and requires PCB layout confirmation.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All three substitute parts (227SVH050MGE, 227SVL035MGW, and ATB227M035) are ROHS3 compliant with MSL Level 1 rating, maintaining full environmental and regulatory compliance.

Q: Which substitute part is best for direct PCB replacement without layout modification?

A: 227SVL035MGW provides the closest dimensional match to the original MALSECL00AG322FARK, with identical surface mount land size (0.406" L x 0.406" W) and matching height specification. It also offers extended 5000-hour lifetime and expanded temperature range.

Q: Can these parts be used interchangeably in the same circuit?

A: Yes, within the constraints of your circuit design. All three parts share identical capacitance (220 µF), tolerance (±20%), and package type (Radial, Can - SMD). Verify that your circuit can accommodate the voltage rating and ripple current specifications of your selected substitute. ATB227M035 requires PCB land size verification due to its slightly larger footprint.