Equivalent & Substitute Parts Reference: MAL212314101E3

Part Overview

The Vishay Beyschlag/Draloric/BC Components MAL212314101E3 is an aluminum electrolytic capacitor with a capacitance of 100 µF, a rated voltage of 10 V, and an ESR of 1.8 Ohm. This component features an axial can package and offers a lifetime of 20,000 hours at 125°C. Designed for general purpose applications, the part status is listed as obsolete, which necessitates searching for compatible substitute models to ensure continuity in production or servicing requirements.

Substiute Parts

MAL212314101E3

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 977MAL212314101E3 Datasheet

Current PartRFQ

MAL202134101E3

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1341MAL202134101E3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute selection for the aluminum electrolytic capacitor MAL212314101E3 utilizes the following strictly defined parameters: capacitance value, rated voltage, tolerance, ESR, impedance, package type, mounting style, compliance (RoHS, REACH), and classification codes (ECCN, HTSUS). Inclusion as a substitute is determined by equivalence or compatibility in these parameters, as outlined in the provided details.

Parameter Comparison

Engineering Selection Recommendations

Selection of substitute parts for the MAL212314101E3 is guided by comparison of available product statuses and compliance certifications. The substitute MAL202134101E3 is active and meets RoHS3 and REACH compliance requirements, matching industry standards and regulatory considerations specified for the original part. ECCN and HTSUS codes are consistent between both parts, supporting equivalence for export and classification purposes.

Frequently Asked Questions (FAQ)

Q1: Which parameters must be strictly matched when substituting aluminum electrolytic capacitors in this category?
A1: Capacitance, voltage rating, tolerance, ESR, impedance, mounting type, package type, and compliance status must match or be compatible based on application requirements.

Q2: Are package or mounting style differences relevant for substitution?
A2: Yes. Both the original and substitute parts share the "Axial, Can" package and "Through Hole" mounting type, ensuring mechanical compatibility.

Q3: Is RoHS and REACH compliance required for direct substitution?
A3: Yes. Compliance parameters must be matched; both parts are listed as ROHS3 Compliant and REACH Unaffected.

Q4: Can ECCN and HTSUS classifications affect choice of substitute?
A4: Yes. Substitute parts must align with the same ECCN (EAR99) and HTSUS (8532.22.0020) codes for regulatory alignment.

Q5: How does the product status influence selection?
A5: The main part MAL212314101E3 is obsolete, so substitute selection is based on availability and active product status, as seen with MAL202134101E3.

Q6: Why are lifetime and operating temperature considered in substitution?
A6: Lifetime and temperature ratings determine durability and operational suitability. Substitutes must provide sufficient performance for the intended application, based strictly on provided data.

Q7: Is detailed physical dimension matching required for these substitutes?
A7: Size and dimension compatibility can affect fit; both parts are axial can types, but actual physical sizes differ and must be checked for exact application fit. Only provided dimensions should be used for comparison.