MAAM-010617-000000 Equivalent & Substitute Parts

Part Overview

The MAAM-010617-000000 is an RF Amplifier IC operating across the 30MHz to 4GHz frequency range in a SOT-89 surface mount package. This device delivers 13dB gain with a 4.5dB noise figure at 2.14GHz test frequency, supporting 5V supply operation at 430mA current draw with a P1dB output of 31dBm.

The MAAM-010617-000000 is classified as obsolete. Locating equivalent or substitute components is necessary to maintain design continuity and ensure ongoing availability for production and field replacement applications.

Substiute Parts

MAAM-010617-000000

MACOM Technology SolutionsIn Stock: 827MAAM-010617-000000 Datasheet

Current PartRFQ

XF1001-SC-0G00

MACOM Technology SolutionsIn Stock: 16919XF1001-SC-0G00 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAAM-010617-000000 is evaluated based on the following critical parameters:

Package Compatibility: Both the main part and substitute must use the TO-243AA package / SOT-89 supplier device package to ensure mechanical and electrical compatibility with existing PCB layouts.

Frequency Coverage: The substitute must support operation within or exceed the 30MHz to 4GHz frequency range of the original device.

Electrical Performance: Gain, noise figure, and supply voltage characteristics must be compatible with circuit requirements. The substitute XF1001-SC-0G00 operates at 6GHz frequency capability, exceeding the original specification, with matching 4.5dB noise figure and comparable gain performance.

Supply Voltage & Current: The substitute operates at 8V rated voltage with 450mA current rating, providing headroom above the original 5V / 430mA specification.

Regulatory Compliance: Both parts share identical ECCN (EAR99) and HTSUS (8542.33.0001) classifications, ensuring consistent export and tariff treatment.

Moisture Sensitivity: Both parts maintain MSL 1 (Unlimited) rating, indicating no moisture sensitivity constraints.

Parameter Comparison

Engineering Selection Recommendations

The XF1001-SC-0G00 is an active production substitute for the obsolete MAAM-010617-000000. Both components are manufactured by MACOM Technology Solutions and share identical package specifications (TO-243AA / SOT-89), moisture sensitivity ratings, and regulatory classifications (ECCN EAR99, HTSUS 8542.33.0001).

The XF1001-SC-0G00 demonstrates superior frequency capability (6GHz vs. 4GHz), higher gain (15.5dB vs. 13dB), and equivalent noise figure (4.5dB). The substitute operates at higher voltage and current ratings (8V / 9V rated, 450mA vs. 5V / 430mA), providing design margin for existing applications.

The substitute carries ROHS3 compliance certification, supporting environmental and regulatory requirements for modern production environments.

Frequently Asked Questions (FAQ)

Q: Can the XF1001-SC-0G00 directly replace the MAAM-010617-000000 in existing designs?

A: Direct PCB-level replacement is possible due to identical TO-243AA package and SOT-89 supplier device package specifications. However, circuit validation is required to confirm compatibility with supply voltage, gain, and frequency performance differences.

Q: What are the key differences between these parts?

A: The XF1001-SC-0G00 operates at higher frequency (6GHz vs. 4GHz), delivers higher gain (15.5dB vs. 13dB), and requires higher supply voltage (8V / 9V rated vs. 5V). Noise figure remains equivalent at 4.5dB. The substitute is in active production while the original is obsolete.

Q: Are there supply voltage compatibility concerns?

A: The substitute is rated for 8V to 9V operation versus the original 5V specification. Circuit design must accommodate this voltage difference through appropriate power supply adjustment or voltage regulation.

Q: Do both parts share the same regulatory classifications?

A: Yes. Both components carry identical ECCN (EAR99) and HTSUS (8542.33.0001) classifications, ensuring consistent export control and tariff treatment.

Q: What is the moisture sensitivity rating for these components?

A: Both parts maintain MSL 1 (Unlimited) rating, indicating no moisture sensitivity constraints during storage, handling, or assembly.