Equivalent & Substitute Parts for MA2ZD0200L

Part Overview

The MA2ZD0200L is a Schottky diode manufactured by Panasonic Electronic Components, rated for 20V DC reverse voltage and 500mA average rectified current in a surface mount SMini2-F1 package. This component is classified as obsolete, necessitating identification of equivalent substitute parts for ongoing design requirements and procurement needs. Equivalent parts must maintain electrical performance within the specified parameters while offering active product status and continued availability.

Substiute Parts

MA2ZD0200L

Panasonic Electronic ComponentsIn Stock: 33649MA2ZD0200L Datasheet

Current PartRFQ

PMEG2005EJ,115

Nexperia USA Inc.In Stock: 58047PMEG2005EJ,115 Datasheet

SimilarRFQ

PMEG2010AEJ,115

Nexperia USA Inc.In Stock: 61062PMEG2010AEJ,115 Datasheet

SimilarRFQ

SD103CWS-TP

Micro Commercial CoIn Stock: 8558SD103CWS-TP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MA2ZD0200L is determined by the following critical parameters:

Primary Matching Criteria:

• Voltage - DC Reverse (Vr) (Max): 20V minimum
• Technology: Schottky diode
• Mounting Type: Surface Mount
• Package compatibility: SOD-323F or equivalent footprint

Secondary Compatibility Factors:

• Current - Average Rectified (Io): 500mA or greater
• Voltage - Forward (Vf) (Max): ≤ 550 mV @ rated current
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Operating Temperature - Junction: ≥ 125°C

Three substitute parts meet the electrical and mechanical requirements of the MA2ZD0200L:

1. PMEG2005EJ,115 (Nexperia USA Inc.) — Matches 20V, 500mA specifications with improved forward voltage performance and active product status
2. PMEG2010AEJ,115 (Nexperia USA Inc.) — Exceeds current rating at 1A with automotive qualification and active product status
3. SD103CWS-TP (Micro Commercial Co) — Meets 20V specification with reduced current rating of 350mA and active product status

Parameter Comparison

Engineering Selection Recommendations

PMEG2005EJ,115 is the primary equivalent substitute for the MA2ZD0200L. This part maintains identical voltage and current ratings (20V, 500mA) with improved forward voltage performance (390 mV vs. 550 mV @ 500 mA). The part carries active product status, ROHS3 compliance, and REACH unaffected designation, ensuring long-term availability and regulatory alignment. Operating temperature rating of 150°C exceeds the original specification.

PMEG2010AEJ,115 serves as a higher-current alternative when design margins require increased current capacity. Rated for 1A at 20V, this part provides 2× the current handling of the original component. It includes automotive qualification (AEC-Q100) and active product status. Forward voltage at 1A matches the original specification at 500mA. This part is suitable for applications requiring enhanced current performance within the same voltage class.

SD103CWS-TP is applicable only when circuit design permits reduced current capacity (350mA vs. 500mA). This part maintains 20V voltage rating and fast recovery characteristics. It offers the lowest reverse leakage current (5 µA @ 10 V) among the substitutes. Active product status and ROHS3 compliance are confirmed. Operating temperature range extends to −65°C, providing wider thermal operating envelope.

All three substitute parts are compatible with SOD-323F package footprints and maintain surface mount mounting requirements. Selection should be based on specific circuit current requirements and thermal operating conditions.

Frequently Asked Questions (FAQ)

Q: Can PMEG2005EJ,115 be used as a direct replacement for MA2ZD0200L?

A: Yes. PMEG2005EJ,115 matches the critical electrical parameters: 20V reverse voltage, 500mA average rectified current, fast recovery Schottky technology, and SOD-323F package. The improved forward voltage (390 mV vs. 550 mV @ 500 mA) provides enhanced efficiency. Active product status ensures continued availability.

Q: What is the difference between PMEG2010AEJ,115 and PMEG2005EJ,115?

A: PMEG2010AEJ,115 is rated for 1A average rectified current compared to 500mA for PMEG2005EJ,115. Both maintain 20V reverse voltage and SOD-323F packaging. PMEG2010AEJ,115 includes automotive qualification (AEC-Q100). Selection depends on circuit current requirements.

Q: Is SD103CWS-TP suitable for all applications using MA2ZD0200L?

A: SD103CWS-TP is suitable only when circuit design permits 350mA maximum current operation. The part maintains 20V voltage rating and fast recovery characteristics but provides reduced current capacity. Verify circuit current requirements before selection.

Q: Are all substitute parts RoHS compliant?

A: Yes. PMEG2005EJ,115, PMEG2010AEJ,115, and SD103CWS-TP are all ROHS3 compliant. PMEG2005EJ,115 and PMEG2010AEJ,115 carry REACH unaffected designation.

Q: What is the package compatibility between MA2ZD0200L and the substitute parts?

A: MA2ZD0200L uses SMini2-F1 package designation equivalent to SOD-323F. PMEG2005EJ,115 and PMEG2010AEJ,115 use SOD-323F package. SD103CWS-TP uses SOD-323 package. All three maintain compatible surface mount footprints for PCB assembly.

Q: Does operating temperature affect substitute part selection?

A: PMEG2005EJ,115 and PMEG2010AEJ,115 offer 150°C maximum junction temperature compared to 125°C for MA2ZD0200L and SD103CWS-TP. Applications operating near thermal limits benefit from the higher-rated Nexperia parts. SD103CWS-TP extends the lower temperature range to −65°C.

Q: What is the moisture sensitivity level for all parts?

A: All parts, including MA2ZD0200L and the three substitutes, carry MSL 1 (Unlimited) designation, indicating no moisture sensitivity restrictions for storage and handling.