M80-9262242 Equivalent & Substitute Parts

Part Overview

The M80-9262242 is a surface mount rectangular connector header from Harwin Inc.'s Datamate L-Tek series, configured for 22 positions at 2.00mm pitch. This component is classified as obsolete, making identification of compatible alternatives essential for ongoing production and maintenance applications. The part features shrouded 4-wall design with solder termination and latch holder fastening, suitable for board-to-board or cable interconnection in industrial and commercial electronics.

Substiute Parts

M80-9262242

Harwin Inc.In Stock: 925M80-9262242 Datasheet

Current PartRFQ

M80-8262042

Harwin Inc.In Stock: 810M80-8262042 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The M80-8262042 qualifies as a substitute based on the following shared electrical and mechanical parameters:

• Identical manufacturer (Harwin Inc.) and series (Datamate L-Tek)
• Matching pitch specification (0.079" / 2.00mm)
• Identical row configuration (2 rows)
• Matching contact type (Male Pin) and material (Phosphor Bronze)
• Identical shrouding design (Shrouded - 4 Wall)
• Matching surface mount termination method (Solder with Latch Holder)
• Equivalent electrical ratings (2.2A current, 800V voltage)
• Identical operating temperature range (-55°C ~ 125°C)
• Matching insulation material (Polyphenylene Sulfide, Glass Filled)
• Equivalent compliance certifications (ROHS3, UL94 V-0)

The primary difference is position count: M80-9262242 provides 22 positions while M80-8262042 provides 20 positions. This substitution is valid where the application requires 20 or fewer signal connections within the same physical form factor and electrical envelope.

Parameter Comparison

Engineering Selection Recommendations

The M80-8262042 is the designated manufacturer substitute for the obsolete M80-9262242. Selection of this alternative is supported by:

• Active product status with confirmed inventory availability (756 pcs)
• Identical compliance certifications (ROHS3, UL94 V-0, REACH Unaffected)
• Matching electrical and thermal specifications across all rated parameters
• Equivalent mechanical interface and termination methodology
• Same series platform ensuring design continuity

The 20-position configuration of the M80-8262042 accommodates applications requiring up to 20 signal connections. For designs originally specified with all 22 positions populated, circuit redesign or alternative connector selection may be necessary.

Frequently Asked Questions (FAQ)

Q: Can M80-8262042 directly replace M80-9262242 in existing designs?

A: Direct replacement is possible only if the application uses 20 or fewer of the 22 available positions. The substitute provides identical electrical performance, thermal rating, and mechanical interface within its 20-position configuration. PCB layout modifications are required to accommodate the reduced position count.

Q: What are the key compatibility criteria for this substitution?

A: Compatibility is established through matching pitch (2.00mm), row configuration (2 rows), contact type (Male Pin), mounting method (Surface Mount), termination (Solder), shrouding (4 Wall), and electrical ratings (2.2A, 800V). Both parts operate across -55°C to 125°C and meet ROHS3 compliance.

Q: Are there packaging differences between these parts?

A: M80-9262242 packaging is not specified in available data. M80-8262042 is supplied in Tube packaging. Confirm packaging requirements with your procurement specification.

Q: What is the difference between Header and Plug connector types?

A: M80-9262242 is classified as a Header (receptacle), while M80-8262042 is classified as a Plug. Both feature Male Pin contacts and are compatible within the Datamate L-Tek series mating interface.

Q: Is the M80-8262042 suitable for the same operating environment?

A: Yes. Both parts share identical operating temperature range (-55°C to 125°C), moisture sensitivity level (MSL 1 - Unlimited), and material flammability rating (UL94 V-0), confirming environmental compatibility.