M80-8400601 Equivalent & Substitute Parts

Part Overview

The M80-8400601 is a rectangular connector manufactured by Harwin Inc., classified as a Position Connector within the Rectangular Connectors category. This part is currently listed with Obsolete product status. Due to its obsolescence, identifying active equivalent parts is essential for maintaining design continuity and ensuring supply chain reliability for applications requiring this connector type.

Substiute Parts

M80-8400601

Harwin Inc.In Stock: 901M80-8400601 Datasheet

Current PartRFQ

M80-8400642

Harwin Inc.In Stock: 1013M80-8400642 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The M80-8400642 serves as a direct substitute for the M80-8400601 based on the following substitution criteria:

Electrical & Mechanical Compatibility Parameters:

• Manufacturer: Harwin Inc. (same manufacturer ensures design compatibility)
• Category: Rectangular Connectors (identical connector classification)
• Connector Type: Receptacle
• Number of Positions: 6
• Pitch - Mating: 0.079" (2.00mm)
• Mounting Type: Through Hole
• Termination: Solder
• Operating Temperature Range: -55°C ~ 125°C
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

Compliance & Regulatory Alignment:

• RoHS Status: ROHS3 Compliant
• Material Flammability Rating: UL94 V-0
• Voltage Rating: 800V

The M80-8400642 maintains electrical and mechanical compatibility while offering Active product status, ensuring long-term availability and supply chain continuity.

Parameter Comparison

Engineering Selection Recommendations

The M80-8400642 is the designated substitute for the obsolete M80-8400601. Selection of the M80-8400642 is supported by:

• Product Status Alignment: The substitute maintains Active status, ensuring continued manufacturing and availability
• Regulatory Compliance: Both parts maintain REACH Unaffected status and equivalent MSL ratings
• Certification Compliance: The M80-8400642 carries ROHS3 Compliant certification and UL94 V-0 flammability rating, meeting modern regulatory requirements
• Manufacturer Continuity: Both parts are manufactured by Harwin Inc., ensuring design and quality consistency

Frequently Asked Questions (FAQ)

Q: Why is the M80-8400601 being phased out? A: The M80-8400601 is listed as Obsolete. The M80-8400642 represents the current active equivalent within Harwin Inc.'s product line.

Q: Are the M80-8400601 and M80-8400642 mechanically compatible? A: Both connectors are rectangular connectors with Through Hole mounting and Solder termination. The M80-8400642 is specified as a 6-position receptacle connector with 0.079" (2.00mm) pitch, representing the direct mechanical equivalent.

Q: What is the difference in packaging between these parts? A: The M80-8400642 is supplied in Tube packaging. Packaging specifications for the M80-8400601 were not provided in the original documentation.

Q: Are there any compliance differences between the two parts? A: The M80-8400642 carries ROHS3 Compliant certification and UL94 V-0 flammability rating. Both parts maintain REACH Unaffected status and identical MSL ratings of 1 (Unlimited).

Q: What is the current inventory status? A: The M80-8400601 has 802 pieces available as new original stock. The M80-8400642 has 966 pieces available as new original stock.

Q: Can I use the M80-8400642 as a direct replacement in existing designs? A: The M80-8400642 is the designated substitute for the M80-8400601 based on electrical and mechanical compatibility parameters. Design verification should be performed according to your organization's engineering change procedures.