M80-8200722 Equivalent & Substitute Parts

Part Overview

The M80-8200722 is a rectangular connector header manufactured by Harwin Inc., part of the Datamate L-Tek series. This through-hole connector features 7 positions at 2.00mm pitch with shrouded 4-wall design and solder termination. The part is currently listed as obsolete, making identification of suitable substitutes essential for ongoing design support and component procurement.

Key Parameters

Parameter	Value
Manufacturer Part Number	M80-8200722
Manufacturer	Harwin Inc.
Category	Rectangular Connectors
Series	Datamate L-Tek
Connector Type	Plug
Contact Type	Male Pin
Number of Positions	7
Pitch - Mating	0.079" (2.00mm)
Mounting Type	Through Hole
Shrouding	Shrouded - 4 Wall
Termination	Solder
Current Rating	2.2A
Voltage Rating	120V
Operating Temperature	-55°C ~ 125°C
Product Status	Obsolete

Substitute Part Grouping Explanation

The M80-7820742 qualifies as a direct substitute based on the following critical parameters:

Identical pitch specification: 0.079" (2.00mm)
Identical number of positions: 7
Identical connector category: Rectangular Connectors, Datamate L-Tek series
Identical mounting type: Through Hole
Identical shrouding configuration: Shrouded - 4 Wall
Identical termination method: Solder
Identical electrical ratings: 2.2A current, 120V voltage
Identical operating temperature range: -55°C ~ 125°C
Identical material flammability rating: UL94 V-0
Identical contact material: Phosphor Bronze
Identical contact finish on mating surface: Gold plating at 29.5µin (0.75µm)

The substitute part M80-7820742 carries Active product status, ensuring continued availability and support compared to the obsolete M80-8200722.

Parameter Comparison

Parameter	M80-8200722 (Main Part)	M80-7820742 (Substitute)
Manufacturer	Harwin Inc.	Harwin Inc.
Series	Datamate L-Tek	Datamate L-Tek
Connector Type	Plug	Header
Contact Type	Male Pin	Male Pin
Number of Positions	7	7
Pitch - Mating	0.079" (2.00mm)	0.079" (2.00mm)
Mounting Type	Through Hole	Through Hole
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder
Contact Length - Post	0.215" (5.46mm)	0.177" (4.50mm)
Insulation Height	0.219" (5.56mm)	0.219" (5.56mm)
Contact Finish - Mating	Gold	Gold
Contact Finish - Post	Tin-Lead	Tin
Insulation Material	Polyester, Glass Filled	Polyphenylene Sulfide (PPS), Glass Filled
Current Rating	2.2A	2.2A per Contact
Voltage Rating	120V	120V
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

The M80-7820742 is the appropriate substitute for the obsolete M80-8200722. Both parts maintain identical electrical specifications, mechanical pitch, position count, and thermal operating range. The substitute carries Active product status, ensuring long-term availability and manufacturing support.

Key differences exist in contact post length (0.215" versus 0.177"), insulation material composition (Polyester versus Polyphenylene Sulfide), and post finish (Tin-Lead versus Tin). These differences do not affect functional compatibility in standard board-to-board or cable applications within the specified electrical and thermal parameters.

Both parts comply with ROHS3 and REACH requirements, maintaining equivalent environmental and regulatory standing.

Frequently Asked Questions (FAQ)

Q: Can M80-7820742 directly replace M80-8200722 in existing designs?

A: Yes. Both parts share identical pitch (2.00mm), position count (7), electrical ratings (2.2A, 120V), operating temperature range (-55°C to 125°C), and mechanical mounting configuration (through-hole, shrouded 4-wall, solder termination). The substitute is functionally compatible for board-to-board and cable applications.

Q: What is the significance of the contact post length difference?

A: The M80-8200722 has a post length of 0.215" (5.46mm), while the M80-7820742 has 0.177" (4.50mm). This difference affects insertion depth into mating connectors. Verify that the mating connector accommodates the shorter post length of the substitute part.

Q: Why does the insulation material differ between the two parts?

A: The main part uses Polyester glass-filled insulation, while the substitute uses Polyphenylene Sulfide (PPS) glass-filled insulation. Both materials meet UL94 V-0 flammability requirements and operate across the identical temperature range. PPS offers superior chemical resistance and thermal stability.

Q: Are there packaging differences between these parts?

A: The M80-8200722 packaging is not specified in available data. The M80-7820742 is supplied in Tube packaging. Confirm packaging requirements for your procurement and assembly processes.

Q: What is the difference between Plug and Header connector types?

A: The M80-8200722 is classified as a Plug connector, while M80-7820742 is classified as a Header connector. Both are male pin connectors within the Datamate L-Tek series and function identically in board-to-board applications. The classification reflects design orientation rather than functional capability.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both M80-8200722 and M80-7820742 are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory standards.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message