M80-5C106M4 Equivalent & Substitute Parts

Part Overview

The M80-5C106M4 is a 6-position rectangular header connector from Harwin Inc.'s Datamate J-Tek series, designed for crimp termination with 24-28 AWG discrete wiring. This connector features a panel mount, right-angle configuration with threaded fastening and gold-plated contacts. The product is currently obsolete, making identification of suitable substitute components essential for ongoing system support and new design implementations.

Substiute Parts

M80-5C106M4

Harwin Inc.In Stock: 1238M80-5C106M4 Datasheet

Current PartRFQ

M80-5C10605M5

Harwin Inc.In Stock: 962M80-5C10605M5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M80-5C106M4 is determined by strict alignment of the following electrical and mechanical parameters:

• Connector Series & Manufacturer: Both parts must belong to Harwin Inc.'s Datamate J-Tek series to ensure mechanical and electrical compatibility
• Position Count & Pitch: 6 positions at 0.079" (2.00mm) pitch and 2-row configuration with matching row spacing are mandatory for mating compatibility
• Contact Type & Finish: Male pin contacts with gold plating at 10.0µin (0.25µm) thickness ensure proper electrical performance and contact durability
• Fastening & Features: Threaded fastening with polarizing key/keying slot maintains proper alignment and prevents incorrect mating

The M80-5C10605M5 qualifies as a substitute based on these parameters. However, the termination method differs: the original part uses crimp termination for discrete wiring, while the substitute uses solder termination for surface mount applications. This represents a functional substitution pathway for designs transitioning from panel-mount crimp configurations to surface-mount solder configurations.

Parameter Comparison

Engineering Selection Recommendations

The M80-5C10605M5 is the active substitute for the obsolete M80-5C106M4. Both components share the same Datamate J-Tek series designation, identical pitch and position configuration, and matching contact specifications. The substitute maintains full electrical compatibility through equivalent gold contact finish and thickness specifications.

Selection of the M80-5C10605M5 is appropriate for applications requiring:

• Continuation of designs using the Datamate J-Tek 6-position 2.00mm pitch connector family
• Transition from panel-mount crimp termination to surface-mount solder termination
• Active product status with ongoing manufacturer support
• Compliance with current manufacturing standards

The substitute part provides specified electrical ratings (2.2A per contact, 800V) and operating temperature range (-55°C ~ 125°C) not documented for the original part. Both components carry MSL 1 (Unlimited) moisture sensitivity classification and are REACH Unaffected.

Frequently Asked Questions (FAQ)

Q: Can the M80-5C10605M5 directly replace the M80-5C106M4 in existing assemblies?

A: Direct mechanical replacement is not possible due to different mounting types. The original part is panel mount with crimp termination, while the substitute is surface mount with solder termination. PCB layout and assembly process modifications are required.

Q: What are the key compatibility factors between these two connectors?

A: Compatibility is established through matching position count (6), pitch (0.079" / 2.00mm), row configuration (2 rows with 0.079" spacing), contact type (male pin), and contact finish (gold at 10.0µin thickness). These parameters ensure mating compatibility with corresponding receptacle connectors in the Datamate J-Tek series.

Q: Why does the substitute part specify electrical ratings while the original does not?

A: The original M80-5C106M4 documentation does not include current and voltage ratings. The M80-5C10605M5 provides complete electrical specifications (2.2A per contact, 800V) as part of its active product documentation. These ratings apply to the substitute component and should be used for new designs.

Q: Are there packaging differences between these parts?

A: The original part packaging is not specified in available documentation. The substitute M80-5C10605M5 is supplied in tube packaging. Verify packaging requirements for your procurement and assembly processes.

Q: What is the significance of the product status difference?

A: The M80-5C106M4 is obsolete, indicating discontinued manufacturing and limited availability. The M80-5C10605M5 is active, ensuring ongoing availability, manufacturer support, and compliance with current standards. For new designs, the active substitute is the appropriate selection.