M80-5415022 Equivalent & Substitute Parts

Part Overview

The M80-5415022 is a rectangular connector header manufactured by Harwin Inc., part of the Datamate J-Tek series. This through-hole, right-angle connector features 50 positions with 2.00mm pitch and is designed for board-to-board or cable applications. The part is currently listed as obsolete, making identification of suitable substitute components essential for ongoing design support and procurement planning.

Substiute Parts

M80-5415022

Harwin Inc.In Stock: 811M80-5415022 Datasheet

Current PartRFQ

M80-5415042

Harwin Inc.In Stock: 865M80-5415042 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The M80-5415042 qualifies as a direct substitute for the M80-5415022 based on the following critical parameters:

• Identical connector type, contact type, and position configuration (50-position, 2-row header)
• Matching pitch specifications (0.079" / 2.00mm mating pitch and row spacing)
• Identical mounting type (through-hole, right-angle)
• Matching shrouding design (shrouded 4-wall)
• Identical electrical ratings (2.2A current, 800V voltage)
• Identical operating temperature range (-55°C ~ 125°C)
• Identical material flammability rating (UL94 V-0)
• Same series designation (Datamate J-Tek)

The primary distinction between these parts is product status and compliance certification. The M80-5415042 is active production and RoHS3 compliant, whereas the M80-5415022 is obsolete and RoHS non-compliant.

Parameter Comparison

Engineering Selection Recommendations

The M80-5415042 is the direct substitute for the obsolete M80-5415022. Both parts maintain identical mechanical and electrical specifications across all critical parameters including connector geometry, pitch, contact configuration, and electrical ratings.

The M80-5415042 offers the advantage of active production status and RoHS3 compliance, making it suitable for new designs and applications subject to regulatory requirements. The contact finish on the post differs between the two parts (tin-lead versus tin), which reflects modern manufacturing standards and environmental compliance in the substitute part.

For applications currently using the M80-5415022, the M80-5415042 provides a direct functional replacement without design modification or PCB layout changes.

Frequently Asked Questions (FAQ)

Q: Can the M80-5415042 be used as a direct replacement for the M80-5415022?

A: Yes. The M80-5415042 is a direct substitute. Both parts share identical connector type, position count, pitch, mounting configuration, and electrical ratings. No design changes are required.

Q: What is the difference between these two parts?

A: The primary differences are product status and compliance. The M80-5415022 is obsolete and RoHS non-compliant. The M80-5415042 is in active production and RoHS3 compliant. The contact post finish differs (tin-lead versus tin), reflecting current manufacturing standards.

Q: Are there any compatibility concerns with the different contact finishes?

A: Both parts use gold-plated mating contacts with identical thickness specifications. The post finish difference does not affect mating compatibility or electrical performance in standard applications.

Q: What packaging is available for the substitute part?

A: The M80-5415042 is supplied in tube packaging, whereas the original part packaging is not specified.

Q: Is the M80-5415042 suitable for new designs?

A: Yes. The M80-5415042 is in active production with RoHS3 compliance, making it appropriate for new product designs and applications subject to environmental regulations.