M80-5300622 Equivalent & Substitute Parts

Part Overview

The M80-5300622 is a rectangular connector header manufactured by Harwin Inc., part of the Datamate J-Tek series. This is a through-hole, right-angle connector with 6 positions at 2.00mm pitch, designed for board-to-board or cable applications. The part is currently listed as obsolete, making identification of suitable substitute components essential for ongoing design support and procurement planning.

Key Parameters

Parameter	Value
Manufacturer Part Number	M80-5300622
Manufacturer	Harwin Inc.
Series	Datamate J-Tek
Connector Type	Header
Number of Positions	6
Pitch - Mating	0.079" (2.00mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Current Rating	2.2A
Voltage Rating	800V
Operating Temperature	-55°C ~ 125°C
Product Status	Obsolete

Substitute Part Grouping Explanation

The M80-5300642 qualifies as a direct substitute for the M80-5300622 based on the following critical parameters:

Identical connector type, pitch, and position count (6-position, 2.00mm)
Matching mounting configuration (through-hole, right-angle)
Identical shrouding design (shrouded - 4 wall)
Equivalent electrical ratings (2.2A current, 800V voltage)
Matching operating temperature range (-55°C ~ 125°C)
Same contact material and insulation specifications
Identical mechanical dimensions and mating interface

The primary distinction is product status: M80-5300642 is active and in production, whereas M80-5300622 is obsolete. Additionally, M80-5300642 carries RoHS3 compliance, whereas M80-5300622 is RoHS non-compliant.

Parameter Comparison

Parameter	M80-5300622 (Main)	M80-5300642 (Substitute)
Manufacturer	Harwin Inc.	Harwin Inc.
Series	Datamate J-Tek	Datamate J-Tek
Connector Type	Header	Header
Contact Type	Male Pin	Male Pin
Number of Positions	6	6
Number of Rows	2	2
Pitch - Mating	0.079" (2.00mm)	0.079" (2.00mm)
Row Spacing - Mating	0.079" (2.00mm)	0.079" (2.00mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder
Fastening Type	Threaded	Threaded
Insulation Height	0.218" (5.55mm)	0.218" (5.55mm)
Contact Shape	Circular	Circular
Contact Finish - Mating	Gold	Gold
Contact Finish Thickness - Mating	29.5µin (0.75µm)	29.5µin (0.75µm)
Contact Finish - Post	Tin-Lead	Tin
Contact Material	Phosphor Bronze	Phosphor Bronze
Insulation Material	Polyphenylene Sulfide (PPS), Glass Filled	Polyphenylene Sulfide (PPS), Glass Filled
Features	Keying Slot, Mating Flange	Keying Slot, Mating Flange
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0
Insulation Color	Black	Black
Current Rating	2.2A	2.2A
Voltage Rating	800V	800V
Contact Finish Thickness - Post	118.1µin (3.00µm)	118.1µin (3.00µm)
Base Product Number	M80-530	M80-530
Product Status	Obsolete	Active
RoHS Status	RoHS non-compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected
ECCN	EAR99	EAR99
HTSUS	8536.69.4040	8536.69.4040

Engineering Selection Recommendations

The M80-5300642 is the direct substitute for the obsolete M80-5300622. Both components share identical electrical and mechanical specifications, ensuring functional compatibility in existing designs.

The primary consideration for component selection is regulatory compliance. The M80-5300642 carries ROHS3 certification, whereas the M80-5300622 is RoHS non-compliant. For new designs or applications subject to RoHS requirements, M80-5300642 is the appropriate selection. For legacy systems or applications without RoHS mandates, both parts remain electrically and mechanically equivalent.

The contact finish on the post differs between the two parts: M80-5300622 uses Tin-Lead, while M80-5300642 uses Tin. This distinction reflects the RoHS transition and does not affect electrical performance or mechanical compatibility.

Frequently Asked Questions (FAQ)

Q: Can M80-5300642 be used as a direct replacement for M80-5300622?

A: Yes. Both connectors are identical in pitch (2.00mm), position count (6), mounting type (through-hole, right-angle), shrouding configuration, and electrical ratings (2.2A, 800V). They are mechanically and electrically interchangeable.

Q: What is the difference between these two parts?

A: The primary differences are product status and regulatory compliance. M80-5300622 is obsolete and RoHS non-compliant, while M80-5300642 is active and ROHS3 compliant. The contact post finish differs: Tin-Lead versus Tin, respectively.

Q: Why should I choose M80-5300642 over M80-5300622?

A: M80-5300642 is in active production with higher inventory availability (2200 pcs vs. 842 pcs). It carries ROHS3 compliance, meeting current regulatory standards. For new designs or procurement, M80-5300642 is the recommended selection.

Q: Are there any compatibility concerns when switching from M80-5300622 to M80-5300642?

A: No compatibility concerns exist. The connectors share identical mating interfaces, pitch, position configuration, and electrical specifications. PCB footprints and mating connector designs remain unchanged.

Q: What is the packaging difference?

A: M80-5300622 packaging is not specified in the data. M80-5300642 is supplied in Tube packaging. Verify packaging requirements for your procurement process.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both M80-5300622 and M80-5300642 operate across the identical temperature range of -55°C to 125°C.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message