M80-5200622 Equivalent & Substitute Parts

Part Overview

The M80-5200622 is a rectangular connector header manufactured by Harwin Inc., part of the Datamate J-Tek series. This through-hole mounted connector features 6 positions arranged in 2 rows with 2.00mm pitch, designed for board-to-board or cable applications. The part is classified as obsolete, making identification of active equivalent components essential for ongoing design support and procurement.

Substiute Parts

M80-5200622

Harwin Inc.In Stock: 836M80-5200622 Datasheet

Current PartRFQ

M80-5200642

Harwin Inc.In Stock: 1226M80-5200642 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M80-5200622 is determined by strict equivalence across the following critical parameters:

• Connector type, contact type, and gender (Header, Male Pin)
• Position count and row configuration (6 positions, 2 rows)
• Mating pitch and row spacing (0.079" / 2.00mm)
• Mounting method (Through Hole)
• Electrical ratings (2.2A current, 120V voltage)
• Operating temperature range (-55°C ~ 125°C)
• Shrouding configuration (Shrouded - 4 Wall)
• Fastening mechanism (Push-Pull)

The M80-5200642 qualifies as a direct substitute based on identical values across all these parameters. Differences in contact finish post material (Tin-Lead vs. Tin) and RoHS compliance status do not affect functional interchangeability within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

The M80-5200642 is the direct functional equivalent of the M80-5200622. Selection between these parts should be based on the following criteria:

For new designs or redesigns: The M80-5200642 is the appropriate choice. This part carries Active product status and meets ROHS3 compliance requirements, aligning with current regulatory standards and ensuring long-term supply chain availability.

For legacy system maintenance: The M80-5200622 remains functionally interchangeable with M80-5200642 in existing applications where RoHS compliance is not a requirement. The difference in contact finish post material (Tin-Lead vs. Tin) does not affect electrical performance within the specified operating parameters.

Compliance considerations: Organizations subject to RoHS regulations should transition to M80-5200642. Both parts maintain identical electrical ratings, temperature ranges, and mechanical interfaces, ensuring drop-in compatibility.

Frequently Asked Questions (FAQ)

Q: Can M80-5200642 be used as a direct replacement for M80-5200622 in existing assemblies?

A: Yes. Both connectors share identical electrical ratings (2.2A, 120V), operating temperature range (-55°C ~ 125°C), mechanical configuration (6 positions, 2 rows, 2.00mm pitch), and mounting method (through-hole). The contact finish post difference does not affect functional interchangeability.

Q: What is the primary difference between these two parts?

A: The M80-5200642 is the active production equivalent of the obsolete M80-5200622. The M80-5200642 is ROHS3 compliant and uses Tin post finish, while the M80-5200622 uses Tin-Lead post finish and is RoHS non-compliant.

Q: Are there any mechanical compatibility issues when substituting M80-5200642 for M80-5200622?

A: No. Both parts are identical in mechanical dimensions, pitch spacing (2.00mm), row configuration (2 rows), shrouding design (4-wall shrouded), and fastening mechanism (push-pull). PCB footprints and mating connector interfaces are fully compatible.

Q: Which part should be specified for new product designs?

A: M80-5200642 should be specified for new designs. This part is in active production status and meets current RoHS3 compliance standards, ensuring regulatory alignment and supply chain continuity.

Q: Does the contact finish difference affect electrical performance?

A: No. Both Tin-Lead and Tin finishes on the post provide equivalent electrical conductivity and contact resistance within the specified operating parameters. The mating surface gold finish is identical on both parts.