M80-4T11642FC Equivalent & Substitute Parts

Part Overview

The M80-4T11642FC is a 16-position receptacle connector from Harwin Inc.'s Datamate J-Tek series, designed for board-to-board or cable applications with 0.079" (2.00mm) pitch spacing. This connector features gold-plated mating contacts, screw lock fastening, and through-hole solder termination. The part is classified as obsolete, making identification of active equivalent components essential for ongoing production and maintenance applications.

Substiute Parts

M80-4T11642FC

Harwin Inc.In Stock: 952M80-4T11642FC Datasheet

Current PartRFQ

M80-4T11642FD

Harwin Inc.In Stock: 934M80-4T11642FD Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M80-4T11642FC is determined by strict equivalence across the following electrical and mechanical parameters:

• Connector type (Receptacle) and contact type (Female Socket)
• Number of positions (16) and row configuration (2 rows)
• Mating pitch (0.079" / 2.00mm) and row spacing (0.079" / 2.00mm)
• Mounting method (Through Hole) and termination type (Solder)
• Electrical ratings: Current (2.2A) and Voltage (800V)
• Operating temperature range (-55°C ~ 125°C)
• Contact finish specifications (Gold mating, Tin post)
• Fastening type (Screw Lock) and mechanical features (Jackscrews, Mating Flange, Mounting Flange, Polarizing Key)

The M80-4T11642FD meets all these criteria and is classified as an active product within the same Datamate J-Tek series.

Parameter Comparison

Engineering Selection Recommendations

The M80-4T11642FD is a direct functional equivalent to the M80-4T11642FC. Both connectors are manufactured by Harwin Inc. within the Datamate J-Tek series and share identical electrical, mechanical, and environmental specifications. The primary distinction is product status: the M80-4T11642FC is obsolete, while the M80-4T11642FD is active and currently in production.

For new designs and ongoing production requiring this connector type, the M80-4T11642FD is the appropriate selection. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for automotive, general purpose, and military applications.

Frequently Asked Questions (FAQ)

Q: Can the M80-4T11642FD be used as a direct replacement for the M80-4T11642FC?

A: Yes. The M80-4T11642FD is electrically and mechanically equivalent to the M80-4T11642FC. All critical parameters including connector type, position count, pitch, mounting method, electrical ratings, and operating temperature range are identical. The substitute part is compatible with existing mating connectors and PCB layouts designed for the original part.

Q: What is the difference between these two part numbers?

A: The M80-4T11642FD differs from the M80-4T11642FC only in product status. The M80-4T11642FC is classified as obsolete, while the M80-4T11642FD is an active product currently manufactured by Harwin Inc. All functional specifications remain unchanged.

Q: Are there any compliance or certification differences?

A: No. Both parts maintain identical compliance certifications: ROHS3 compliant, REACH unaffected, UL94 V-0 flammability rating, and MSL 1 (unlimited moisture sensitivity level). Regulatory requirements are satisfied by either part.

Q: Will the M80-4T11642FD work with existing mating plugs and connectors?

A: Yes. The M80-4T11642FD maintains the same mating pitch (0.079" / 2.00mm), row spacing, contact geometry, and fastening mechanism as the M80-4T11642FC. Full compatibility with existing Datamate J-Tek series mating connectors is assured.

Q: What applications are supported by the M80-4T11642FD?

A: The M80-4T11642FD is rated for automotive, general purpose, and military applications. Operating temperature range of -55°C to 125°C, current rating of 2.2A, and voltage rating of 800V support these application categories.