M80-2530045 Equivalent & Substitute Parts

Part Overview

The M80-2530045 is a socket contact connector from Harwin Inc.'s Datamate Trio-Tek series, designed for 22-24 AWG wire gauges with gold-plated crimp termination. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain supply chain continuity and ensure long-term project viability. The part remains in stock with 1,085 units available, but its discontinued status requires transition planning to active alternatives.

Substiute Parts

M80-2530045

Harwin Inc.In Stock: 1125M80-2530045 Datasheet

Current PartRFQ

M80-0110005

Harwin Inc.In Stock: 34136M80-0110005 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M80-2530045 is determined by the following critical parameters:

• Contact Type: Socket configuration required
• Termination Method: Crimp termination mandatory
• Wire Gauge Compatibility: 22 AWG falls within the 22-24 AWG range of the original part
• Contact Finish: Gold plating with matching thickness specification (11.8µin / 0.30µm)
• Compliance Standards: ROHS3 compliance, REACH unaffected status, and MSL 1 rating maintained
• Manufacturer Consistency: Harwin Inc. parts ensure design and performance alignment

The M80-0110005 qualifies as a direct substitute based on these parameters. While it operates at 22 AWG (the lower end of the original 22-24 AWG range), this represents a valid substitution for applications requiring 22 AWG wire gauge connectivity.

Parameter Comparison

Engineering Selection Recommendations

The M80-0110005 is the designated substitute for the obsolete M80-2530045. Selection of this active part is supported by:

• Compliance Alignment: Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory continuity
• Electrical Specifications: Identical contact finish, finish thickness, and termination method guarantee electrical performance equivalence
• Supply Continuity: The M80-0110005 is active with 34,074 units in stock, providing reliable long-term availability compared to the obsolete original
• Wire Gauge Compatibility: The 22 AWG specification of the substitute accommodates applications within the original 22-24 AWG range

For applications requiring 23-24 AWG wire gauge specifically, compatibility must be verified against the M80-0110005 contact specifications prior to implementation.

Frequently Asked Questions (FAQ)

Q: Can the M80-0110005 directly replace the M80-2530045 in existing designs?

A: The M80-0110005 is electrically and mechanically equivalent for 22 AWG applications. Both parts share identical contact finish, termination method, and compliance certifications. Applications using 22 AWG wire gauge can transition directly to the substitute.

Q: What is the wire gauge difference between these parts?

A: The original M80-2530045 supports 22-24 AWG, while the M80-0110005 is specified for 22 AWG. The substitute covers the lower end of the original range. Applications requiring 23-24 AWG wire gauge must confirm compatibility with the substitute's contact specifications.

Q: Are there compliance or regulatory differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. Regulatory and environmental compliance requirements are identical.

Q: Why is the original part obsolete?

A: The M80-2530045 belongs to the Datamate Trio-Tek series, which has been superseded by the active Datamate series represented by the M80-0110005. Harwin Inc. has transitioned product lines to the newer series.

Q: What packaging differences exist?

A: The M80-2530045 packaging is unspecified in available data. The M80-0110005 is supplied in bulk packaging, suitable for production and assembly environments.

Q: Is the contact finish thickness identical?

A: Yes. Both parts specify 11.8µin (0.30µm) gold contact finish thickness, ensuring equivalent electrical contact resistance and durability characteristics.