M62R Slide Switch 6PDT Equivalent & Substitute Parts

Part Overview

The M62R is a 6PDT slide switch manufactured by APEM Inc., designed for through-hole, right-angle mounting applications. This component features a 300mA current rating at 125V AC and 30V DC, with an 8mm actuator length and silver-plated contacts. The M62R is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and new design implementations.

Substiute Parts

M62R

APEM Inc.In Stock: 955M62R Datasheet

Current PartRFQ

EG6201

E-SwitchIn Stock: 6030EG6201 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The EG6201 manufactured by E-Switch qualifies as a functional substitute based on the following critical parameters:

Matching Parameters:

• Circuit configuration: 6PDT (identical pole-throw arrangement)
• Mounting type: Through hole, right angle (identical mechanical interface)
• Termination style: PC pin (identical connection method)
• Switch function: On-On (identical operational mode)
• Contact finish: Silver (identical contact material specification)
• RoHS3 compliance: Both parts meet the same regulatory requirement

Allowable Deviations: The EG6201 operates at reduced current and voltage ratings (200mA DC at 30V DC) compared to the M62R (300mA at 125V AC / 30V DC). This substitution is valid only in applications where the circuit requirements do not exceed the EG6201's electrical specifications. The EG6201 features a shorter actuator length (4.00mm versus 8.00mm) and reduced switch travel (2.00mm versus 4.00mm), which may affect mechanical fit and actuation feel in the host assembly.

Parameter Comparison

Engineering Selection Recommendations

The EG6201 is suitable as a substitute for the M62R in applications where all of the following conditions are met:

• Circuit current requirements do not exceed 200mA
• Circuit voltage requirements do not exceed 30V DC (AC operation is not supported by EG6201)
• Mechanical assembly accommodates a 4.00mm actuator length (versus 8.00mm on M62R)
• Reduced switch travel (2.00mm) is compatible with the application's actuation mechanism
• Operating temperature range of -20°C to 70°C satisfies the application environment

Both parts maintain ROHS3 compliance and identical circuit topology (6PDT, On-On configuration), ensuring regulatory and functional compatibility within the specified electrical limits. The EG6201's active product status provides long-term availability compared to the obsolete M62R.

Frequently Asked Questions (FAQ)

Q: Can the EG6201 directly replace the M62R in all applications?

A: No. The EG6201 has lower current and voltage ratings (200mA at 30V DC versus 300mA at 125V AC/30V DC). Substitution is valid only if your application operates within the EG6201's electrical specifications. Additionally, the shorter actuator length (4.00mm versus 8.00mm) requires mechanical compatibility verification.

Q: What is the primary difference between these two switches?

A: The M62R supports higher current (300mA) and AC voltage operation (125V AC), while the EG6201 is limited to 200mA DC at 30V DC. Both share identical 6PDT circuit configuration and through-hole right-angle mounting.

Q: Does the reduced switch travel on the EG6201 affect functionality?

A: Switch travel (2.00mm on EG6201 versus 4.00mm on M62R) affects the physical distance the actuator moves. This may impact tactile feedback and mechanical design. Verify that your assembly's actuation mechanism is compatible with the reduced travel distance.

Q: Are both parts RoHS compliant?

A: Yes. Both the M62R and EG6201 are ROHS3 compliant, meeting current environmental and regulatory requirements.

Q: What is the availability status of each part?

A: The M62R is obsolete and no longer manufactured. The EG6201 is active and currently produced by E-Switch, ensuring ongoing availability for new designs and replacements.

Q: Can the EG6201 operate in AC circuits?

A: No. The EG6201 is rated for DC operation only (30V DC maximum). The M62R supports both AC (125V) and DC (30V) operation. If your application requires AC switching, the EG6201 is not suitable.