M39006/09-8513 Equivalent & Substitute Parts

Part Overview

The M39006/09-8513 is a 150 µF hermetically sealed tantalum capacitor rated at 30 V, designed for through-hole axial mounting in military applications. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain system functionality and ensure continued availability for production and field service applications.

Substiute Parts

M39006/09-8513

Vishay SpragueIn Stock: 833M39006/09-8513 Datasheet

Current PartRFQ

M39006/22-0118

Vishay SpragueIn Stock: 808M39006/22-0118 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M39006/09-8513 is determined by strict equivalence across the following parameters:

• Capacitance Value: 150 µF (exact match required)
• Voltage Rating: 30 V (exact match required)
• Tolerance: ±5% (exact match required)
• Type: Hermetically Sealed tantalum (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Configuration: Through Hole Axial (exact match required)
• Physical Dimensions: 0.406" Dia x 0.828" L / 10.31mm x 21.03mm (exact match required)
• Manufacturer Size Code: T3 (exact match required)

The M39006/09-8513 belongs to the MIL-PRF-39006/09 military specification series. Direct substitutes must maintain identical electrical and mechanical characteristics while originating from the same manufacturer's active product lines.

Parameter Comparison

Engineering Selection Recommendations

The M39006/22-0118 is the direct substitute for the obsolete M39006/09-8513. Both components meet identical electrical and mechanical specifications, with the M39006/22-0118 offering the advantage of active product status, ensuring continued availability and supply chain reliability.

The M39006/22-0118 operates under the MIL-PRF-39006/22 specification series (CLR79) compared to the MIL-PRF-39006/09 series (CLR65) of the original part. Both maintain RoHS non-compliant and REACH Affected compliance status. The failure rate specification differs between the two parts (P at 0.1% versus M at 1%), reflecting different military reliability classifications within the same manufacturer's product portfolio.

Selection of the M39006/22-0118 is appropriate for applications requiring direct form, fit, and function replacement of the M39006/09-8513 in military and high-reliability through-hole axial tantalum capacitor applications.

Frequently Asked Questions (FAQ)

Q: Can the M39006/22-0118 be used as a direct replacement for the M39006/09-8513?

A: Yes. Both components share identical capacitance (150 µF), voltage rating (30 V), tolerance (±5%), hermetically sealed type, operating temperature range (-55°C ~ 125°C), through-hole axial mounting configuration, and physical dimensions (0.406" Dia x 0.828" L / 10.31mm x 21.03mm). The M39006/22-0118 is manufactured by the same supplier (Vishay Sprague) and maintains the same T3 size code.

Q: What is the difference between the MIL-PRF-39006/09 and MIL-PRF-39006/22 specifications?

A: Both specifications define military-grade hermetically sealed tantalum capacitors. The primary distinction lies in the failure rate classification: the M39006/09-8513 carries a P-level failure rate (0.1%), while the M39006/22-0118 carries an M-level failure rate (1%). Both meet the same electrical and mechanical requirements for this capacitance and voltage rating.

Q: Are there any compliance or regulatory differences between these parts?

A: Both the M39006/09-8513 and M39006/22-0118 share identical RoHS non-compliant and REACH Affected status. No compliance advantage exists between the two parts in this regard.

Q: Why is the M39006/09-8513 listed as obsolete?

A: The M39006/09-8513 has been discontinued by the manufacturer. The M39006/22-0118 represents the active equivalent within Vishay Sprague's current product portfolio, ensuring ongoing availability for new designs and field service applications.

Q: Will the M39006/22-0118 fit in the same PCB footprint as the M39006/09-8513?

A: Yes. Both components have identical physical dimensions (0.406" Dia x 0.828" L / 10.31mm x 21.03mm) and axial through-hole mounting configuration, ensuring mechanical compatibility with existing PCB layouts and assembly processes.