M2S025TS-1FGG484I Equivalent & Substitute Parts

Part Overview

The M2S025TS-1FGG484I is an ARM Cortex-M3 System On Chip (SOC) from Microchip Technology's SmartFusion2 product line. This embedded IC integrates a 166MHz processor with 25K logic modules FPGA fabric, 256KB flash memory, and 64KB RAM in a 484-FPBGA package. The device is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same base product family, enabling component interchangeability in production and design scenarios.

Substiute Parts

M2S025TS-1FGG484I

Microchip TechnologyIn Stock: 1244M2S025TS-1FGG484I Datasheet

Current PartRFQ

M2S025-FGG484I

Microchip TechnologyIn Stock: 873M2S025-FGG484I Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2S025TS-1FGG484I is determined by strict equivalence across the following critical parameters:

• Base product number (M2S025)
• Core processor architecture (ARM Cortex-M3)
• Operating frequency (166MHz)
• FPGA logic module count (25K)
• Memory configuration (256KB flash, 64KB RAM)
• Package specification (484-FPBGA 23x23)
• I/O pin count (267)
• Operating temperature range (-40°C to 100°C)
• RoHS and REACH compliance status

The M2S025-FGG484I meets all substitution criteria as a parametric equivalent within the SmartFusion2 family. Both parts share identical electrical specifications, thermal characteristics, and mechanical packaging, differing only in manufacturing lot designation and inventory source.

Parameter Comparison

Engineering Selection Recommendations

Both M2S025TS-1FGG484I and M2S025-FGG484I are Active product status components from Microchip Technology. Selection between these parts is based on availability and procurement requirements rather than technical differentiation. Both parts maintain identical RoHS3 compliance and REACH unaffected status, satisfying regulatory requirements for industrial and commercial applications. The 484-FPBGA package and thermal specifications remain constant across both variants, ensuring PCB layout and thermal management strategies are interchangeable. Component selection should prioritize inventory availability and lead time considerations, as electrical and mechanical compatibility is fully established.

Frequently Asked Questions (FAQ)

Q: Can M2S025-FGG484I be used as a direct replacement for M2S025TS-1FGG484I in existing designs?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, memory configuration, processor speed, FPGA logic module count, package type, and I/O pin count. No design modifications are required for substitution.

Q: Are there differences in thermal performance between these parts?

A: No. Both parts operate within the same temperature range (-40°C to 100°C junction temperature) and share identical thermal characteristics due to matching package specifications and die configuration.

Q: Do both parts require the same PCB footprint?

A: Yes. Both parts use the 484-FPBGA (23x23) package with 267 I/O pins. PCB layout, via placement, and signal routing remain unchanged between parts.

Q: Are there compliance or certification differences?

A: No. Both parts maintain identical RoHS3 compliance and REACH unaffected status. MSL rating is 3 (168 hours) for both variants.

Q: What is the basis for substitution between these parts?

A: Substitution is based on matching base product number (M2S025), processor architecture, operating frequency, memory size, FPGA logic module density, package type, I/O count, and thermal specifications. Differences in part number designation reflect manufacturing lot or inventory source only.