M2S010-VF400 Equivalent & Substitute Parts

Part Overview

The M2S010-VF400 is an ARM Cortex-M3 System On Chip (SOC) from Microchip Technology's SmartFusion2 product line. This embedded IC integrates a 166MHz processor with 10K logic modules FPGA fabric, 256KB flash memory, and 64KB RAM in a 400-pin VFBGA package. The device supports multiple connectivity standards including Ethernet, CAN, USB, and SPI interfaces, making it suitable for mixed-signal embedded applications requiring both processing and programmable logic.

The M2S010-VF400 is currently in active production status. Alternative part numbers within the same product family may be required due to inventory availability, compliance requirements, or specific application certifications.

Substiute Parts

M2S010-VF400

Microchip TechnologyIn Stock: 1051M2S010-VF400 Datasheet

Current PartRFQ

M2S010-VFG400

Microchip TechnologyIn Stock: 2166M2S010-VFG400 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2S010-VF400 is determined by strict equivalence across the following parameters:

• Core processor architecture and speed (ARM Cortex-M3 at 166MHz)
• Memory configuration (256KB flash, 64KB RAM)
• FPGA fabric size (10K logic modules)
• Package specification (400-VFBGA 17x17 form factor)
• I/O pin count (195 pins)
• Peripheral and connectivity feature set
• Operating temperature range (0°C to 85°C)

The M2S010-VFG400 meets all these criteria and is classified as a parametric equivalent. Differences between these part numbers relate to manufacturing process variants and compliance certifications rather than functional or electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

The M2S010-VFG400 is a direct functional equivalent to the M2S010-VF400 with identical electrical and mechanical specifications. The primary distinction is RoHS compliance status: the M2S010-VFG400 meets RoHS3 requirements while the M2S010-VF400 does not.

Selection between these parts should be based on regulatory and compliance requirements for the target application. Applications subject to RoHS directives or customer specifications requiring RoHS3 compliance must use the M2S010-VFG400. Applications without such requirements may use either part number interchangeably from a functional standpoint.

Both parts share identical moisture sensitivity levels (MSL 3, 168 hours), REACH status (unaffected), and ECCN/HTSUS classifications, indicating equivalent handling and logistics requirements.

Frequently Asked Questions (FAQ)

Q: Are M2S010-VF400 and M2S010-VFG400 pin-compatible?

A: Yes. Both parts use the 400-VFBGA (17x17) package with 195 I/O pins in identical pin assignments. PCB layouts and footprints are interchangeable.

Q: What is the difference between M2S010-VF400 and M2S010-VFG400?

A: The parts are functionally identical. The M2S010-VFG400 is RoHS3 compliant, while the M2S010-VF400 is not. All electrical specifications, memory configuration, processor speed, and peripheral features are equivalent.

Q: Can I substitute M2S010-VFG400 for M2S010-VF400 in existing designs?

A: Yes, from a functional and electrical perspective. Verify that your application does not have specific requirements mandating the non-compliant variant. In most cases, the RoHS3-compliant M2S010-VFG400 is the preferred choice.

Q: What does MSL 3 (168 Hours) mean for these parts?

A: Moisture Sensitivity Level 3 indicates the component requires controlled storage conditions. The part can be exposed to ambient conditions (30°C, 85% relative humidity) for a maximum of 168 hours before soldering. Proper moisture barrier packaging and bake-out procedures are required before assembly.

Q: Are there any differences in operating temperature range?

A: No. Both parts operate across the identical temperature range of 0°C to 85°C (junction temperature). Thermal characteristics and derating curves are equivalent.

Q: Which part should I specify for new designs?

A: Specify M2S010-VFG400 for new designs unless specific application requirements mandate the non-compliant variant. The RoHS3-compliant version provides regulatory flexibility and is recommended for long-term product support.