M2S010TS-VF256I Equivalent & Substitute Parts

Part Overview

The M2S010TS-VF256I is an ARM Cortex-M3 System On Chip (SOC) from Microchip Technology's SmartFusion2 product line. This embedded IC integrates a 166MHz processor with 10K logic modules FPGA fabric, 256KB flash memory, and 64KB RAM in a 256-FPBGA package. The device is currently active in production and supports multiple connectivity standards including Ethernet, CAN, USB, SPI, I2C, and UART interfaces. Finding equivalent substitute parts becomes necessary when managing inventory constraints, addressing supply chain disruptions, or optimizing procurement across manufacturing batches.

Substiute Parts

M2S010TS-VF256I

Microchip TechnologyIn Stock: 1003M2S010TS-VF256I Datasheet

Current PartRFQ

M2S010-VFG256I

Microchip TechnologyIn Stock: 1250M2S010-VFG256I Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2S010TS-VF256I is determined by strict equivalence across the following parameters:

• Identical core processor architecture (ARM Cortex-M3)
• Matching clock speed (166MHz)
• Equivalent memory configuration (256KB flash, 64KB RAM)
• Same FPGA logic module count (10K)
• Identical package footprint and pin count (256-FPBGA, 14x14, 138 I/O)
• Matching peripheral and connectivity feature set
• Compatible operating temperature range (-40°C to 100°C)
• Same series designation (SmartFusion2)

The M2S010-VFG256I meets all substitution criteria as a parametric equivalent. Differences in RoHS compliance status and moisture sensitivity level do not affect functional or electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the M2S010TS-VF256I and M2S010-VFG256I are active production devices with identical electrical and functional specifications. Selection between these parts should be based on regulatory and compliance requirements:

The M2S010-VFG256I carries ROHS3 compliance certification, making it the appropriate choice for applications subject to RoHS directives or customer specifications requiring RoHS-compliant components. The M2S010TS-VF256I is designated as RoHS non-compliant and should be selected only when RoHS compliance is not a requirement.

Both devices maintain identical moisture sensitivity levels (MSL 3, 168 hours) and REACH status, ensuring equivalent handling and storage requirements. The ECCN and HTSUS classifications are identical, confirming equivalent export control and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Are M2S010TS-VF256I and M2S010-VFG256I pin-for-pin compatible?

A: Yes. Both devices use the 256-FPBGA (14x14) package with 138 I/O pins in identical configurations. PCB layouts and footprints are interchangeable.

Q: What is the primary difference between these two part numbers?

A: The M2S010-VFG256I is ROHS3 compliant, while the M2S010TS-VF256I is RoHS non-compliant. All electrical, functional, and performance specifications are identical.

Q: Can I substitute M2S010TS-VF256I with M2S010-VFG256I in existing designs?

A: Yes, provided your application or customer requirements do not prohibit RoHS-compliant components. The electrical and functional characteristics are fully equivalent.

Q: Are there any differences in memory or processing capability?

A: No. Both parts feature identical ARM Cortex-M3 processors running at 166MHz, 256KB flash memory, 64KB RAM, and 10K FPGA logic modules.

Q: Do these parts have different operating temperature ranges?

A: No. Both devices operate across the identical temperature range of -40°C to 100°C (junction temperature).

Q: What connectivity interfaces are supported?

A: Both parts support CANbus, Ethernet, I2C, SPI, UART/USART, and USB interfaces, along with DDR, PCIe, and SERDES peripherals.

Q: Are moisture sensitivity and handling requirements the same?

A: Yes. Both devices carry MSL 3 rating with 168-hour exposure limits, requiring identical storage and handling procedures.