M2S010T-FGG484I Equivalent & Substitute Parts

Part Overview

The M2S010T-FGG484I is an ARM Cortex-M3 System On Chip (SOC) from Microchip Technology's SmartFusion2 product line. This embedded IC integrates a 166MHz processor with 10K logic modules FPGA fabric, 256KB flash memory, and 64KB RAM in a 484-FPBGA package. The device is Active in product status and widely used in applications requiring mixed-signal processing with programmable logic capabilities. Substitute parts are identified when equivalent electrical specifications, package compatibility, and operational parameters align with the original design requirements.

Substiute Parts

M2S010T-FGG484I

Microchip TechnologyIn Stock: 1042M2S010T-FGG484I Datasheet

Current PartRFQ

M2S010-FGG484I

Microchip TechnologyIn Stock: 3362M2S010-FGG484I Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2S010T-FGG484I is determined by strict equivalence across the following critical parameters:

• Processor Architecture: ARM Cortex-M3 core at 166MHz
• Memory Configuration: 256KB flash and 64KB RAM
• FPGA Capacity: 10K logic modules
• Package Specification: 484-FPBGA (23x23) with 233 I/O pins
• Thermal Range: -40°C to 100°C junction temperature
• Compliance: ROHS3 and REACH status alignment
• Moisture Sensitivity: MSL 3 rating

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. The M2S010T-FGG484I differs from M2S010-FGG484I only in temperature grade designation (the "T" suffix indicates a specific temperature specification variant). Both parts share identical electrical and functional specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the M2S010T-FGG484I and M2S010-FGG484I are Active products from Microchip Technology with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on:

• Availability: M2S010-FGG484I currently has higher inventory (3300 pcs) compared to M2S010T-FGG484I (966 pcs)
• Temperature Grade Alignment: Verify that the temperature grade designation matches your application's thermal requirements
• Supply Chain Continuity: Both parts maintain Active product status, ensuring long-term availability and support

No additional technical evaluation is required when substituting between these parametrically equivalent parts, as all electrical, functional, and compliance specifications are identical.

Frequently Asked Questions (FAQ)

Q: Can M2S010-FGG484I be used as a direct replacement for M2S010T-FGG484I?

A: Yes. Both parts are parametrically equivalent with identical processor architecture, memory configuration, FPGA capacity, package specification, and operating temperature range. The difference in part number suffix does not affect functional compatibility.

Q: What does the "T" designation in M2S010T-FGG484I indicate?

A: The "T" suffix denotes a specific temperature grade variant within the SmartFusion2 product line. Both M2S010T-FGG484I and M2S010-FGG484I operate across the same -40°C to 100°C junction temperature range.

Q: Are there any package or pinout differences between these parts?

A: No. Both parts use the identical 484-FPBGA (23x23) package with 233 I/O pins. PCB layout and footprint requirements are identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both M2S010T-FGG484I and M2S010-FGG484I are ROHS3 compliant, REACH unaffected, and carry MSL 3 moisture sensitivity rating with 168-hour storage limits.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on current inventory availability and supply chain requirements. Both maintain Active product status with equivalent long-term support.