M2S010-1VF400 Equivalent & Substitute Parts

Part Overview

The M2S010-1VF400 is an ARM Cortex-M3 System On Chip (SOC) from Microchip Technology's SmartFusion2 product line. This embedded IC integrates a 166MHz processor with 10K logic modules FPGA fabric, 256KB flash memory, and 64KB RAM in a 400-pin VFBGA package. The device supports multiple connectivity standards including Ethernet, CAN, USB, and SPI interfaces, making it suitable for mixed-signal embedded applications requiring both processing and programmable logic.

The M2S010-1VF400 is classified as an active product. Equivalent substitute parts exist within the same product family to accommodate different procurement requirements, inventory availability, and compliance specifications.

Substiute Parts

M2S010-1VF400

Microchip TechnologyIn Stock: 804M2S010-1VF400 Datasheet

Current PartRFQ

M2S010-VFG400

Microchip TechnologyIn Stock: 2166M2S010-VFG400 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between M2S010-1VF400 and M2S010-VFG400 is valid based on the following criteria:

Identical Parameters:

• Manufacturer: Microchip Technology
• Series: SmartFusion2
• Core Processor: ARM Cortex-M3
• Speed: 166MHz
• Flash Memory: 256KB
• RAM: 64KB
• FPGA Logic Modules: 10K
• Package Type: 400-VFBGA (17x17)
• Number of I/O: 195
• Operating Temperature: 0°C to 85°C (TJ)
• Moisture Sensitivity Level: 3 (168 Hours)
• Base Product Number: M2S010

Both parts share identical electrical specifications, memory configuration, processing capability, and physical packaging. The parts are functionally interchangeable at the component level.

Parameter Comparison

Engineering Selection Recommendations

Both M2S010-1VF400 and M2S010-VFG400 are active products from Microchip Technology with identical electrical and mechanical specifications. Selection between these parts should be based on compliance requirements:

M2S010-1VF400 is suitable for applications where RoHS compliance is not a requirement or where legacy component specifications are mandated.

M2S010-VFG400 is the preferred selection for new designs and applications requiring ROHS3 compliance. This part carries ROHS3 certification while maintaining full electrical and functional equivalence to the M2S010-1VF400.

Both parts are REACH Unaffected and carry identical ECCN and HTSUS classifications. Inventory availability may also influence selection, with M2S010-VFG400 currently showing higher stock levels (2100 pcs vs. 779 pcs).

Frequently Asked Questions (FAQ)

Q: Are M2S010-1VF400 and M2S010-VFG400 pin-compatible?

A: Yes. Both parts use the 400-VFBGA (17x17) package with 195 I/O pins in identical configurations. PCB layouts and pinout assignments are fully compatible.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance status. M2S010-VFG400 is ROHS3 compliant, while M2S010-1VF400 is RoHS non-compliant. All electrical specifications, memory configuration, processing speed, and package dimensions are identical.

Q: Can I substitute M2S010-VFG400 for M2S010-1VF400 in existing designs?

A: Yes. M2S010-VFG400 is a direct functional equivalent with superior compliance certification. No design changes are required for substitution.

Q: Which part should I specify for new product designs?

A: M2S010-VFG400 is recommended for new designs due to ROHS3 compliance, which aligns with current regulatory requirements and supply chain standards.

Q: Are there any thermal or performance differences between these parts?

A: No. Both parts operate at 166MHz with identical thermal specifications (0°C to 85°C operating temperature range) and identical memory configurations (256KB flash, 64KB RAM).

Q: What is the Moisture Sensitivity Level for both parts?

A: Both M2S010-1VF400 and M2S010-VFG400 have MSL 3 rating with a 168-hour floor life. Identical handling and storage requirements apply to both parts.