M2S005-VF400I Equivalent & Substitute Parts

Part Overview

The M2S005-VF400I is an ARM Cortex-M3 System On Chip (SOC) from Microchip Technology's SmartFusion2 product line. This embedded IC integrates a 166MHz processor with 5K logic modules FPGA fabric, 128KB flash memory, and 64KB RAM in a 400-VFBGA package. The device supports multiple connectivity protocols including CANbus, Ethernet, I2C, SPI, UART/USART, and USB, making it suitable for mixed-signal embedded applications requiring both microcontroller and programmable logic functionality. The M2S005-VF400I is currently in active production status with 1108 units available in inventory.

Identifying equivalent and substitute parts is necessary when addressing supply chain constraints, managing inventory across manufacturing batches, or when specific compliance certifications are required for end-application qualification.

Substiute Parts

M2S005-VF400I

Microchip TechnologyIn Stock: 1149M2S005-VF400I Datasheet

Current PartRFQ

M2S005-VFG400I

Microchip TechnologyIn Stock: 1039M2S005-VFG400I Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2S005-VF400I is determined by strict parametric matching across the following critical attributes:

Mandatory Matching Parameters:

• Manufacturer: Microchip Technology
• Series: SmartFusion2
• Core Processor: ARM Cortex-M3
• Speed: 166MHz
• Flash Memory: 128KB
• RAM Memory: 64KB
• FPGA Logic Modules: 5K
• Package Type: 400-VFBGA (17x17)
• Number of I/O: 169
• Operating Temperature Range: -40°C to 100°C (TJ)
• Connectivity: CANbus, Ethernet, I2C, SPI, UART/USART, USB
• Peripherals: DDR
• MSL Rating: 3 (168 Hours)

The M2S005-VFG400I meets all parametric requirements for direct substitution. Both parts share identical electrical specifications, memory configuration, FPGA fabric capacity, and package dimensions. The primary distinction between these parts relates to compliance certifications rather than functional or electrical parameters.

Parameter Comparison

Engineering Selection Recommendations

M2S005-VF400I Selection Criteria: Select this part number when RoHS non-compliant components are acceptable for your application. This variant is suitable for applications without RoHS regulatory requirements or when legacy system compatibility is necessary.

M2S005-VFG400I Selection Criteria: Select this part number when ROHS3 compliance is required. This variant is mandatory for applications subject to RoHS Directive 2011/65/EU or equivalent regional regulations. The M2S005-VFG400I provides identical electrical and functional performance while meeting enhanced environmental compliance standards.

Both parts maintain active production status and are available in adequate inventory quantities. Selection between these variants should be based solely on compliance requirements applicable to the end application and target market.

Frequently Asked Questions (FAQ)

Q: Are M2S005-VF400I and M2S005-VFG400I electrically interchangeable?

A: Yes. Both parts are electrically and functionally identical. They share the same ARM Cortex-M3 processor, clock speed, memory configuration, FPGA fabric capacity, I/O count, and package dimensions. The parts differ only in RoHS compliance certification.

Q: What is the difference between these two part numbers?

A: The M2S005-VF400I is RoHS non-compliant, while the M2S005-VFG400I is ROHS3 compliant. All other specifications, including electrical performance, memory, processing capability, and package type, are identical.

Q: Can I use M2S005-VFG400I as a substitute for M2S005-VF400I?

A: Yes, the M2S005-VFG400I is a direct parametric equivalent and can be used as a substitute. The ROHS3 compliant variant provides the same functionality with enhanced environmental compliance.

Q: Can I use M2S005-VF400I as a substitute for M2S005-VFG400I?

A: Substitution is possible only if your application does not require RoHS compliance. If RoHS certification is mandatory for your end product or market, the M2S005-VF400I is not suitable.

Q: Are there any PCB layout or thermal considerations when switching between these parts?

A: No. Both parts use the 400-VFBGA (17x17) package with identical pin assignments, thermal characteristics, and I/O configuration. PCB layouts and thermal management designs are fully compatible.

Q: What is the MSL rating and why does it matter?

A: Both parts carry MSL 3 (168 Hours) rating. This indicates the maximum time the component can be exposed to moisture at specified temperature and humidity conditions before soldering. Storage and handling procedures are identical for both variants.

Q: Are both parts currently available?

A: Yes. M2S005-VF400I has 1108 units in stock, and M2S005-VFG400I has 996 units in stock. Both are in active production status.