M2S005S-VF400 Equivalent & Substitute Parts

Part Overview

The M2S005S-VF400 is an ARM Cortex-M3 System On Chip (SOC) from Microchip Technology's SmartFusion2 product line. This embedded IC integrates a 166MHz processor with 5K logic modules FPGA fabric, 128KB flash memory, and 64KB RAM in a 400-pin VFBGA package. The device is currently in active production status and supports multiple connectivity interfaces including CANbus, Ethernet, I2C, SPI, UART/USART, and USB. Finding equivalent parts is necessary when addressing supply chain constraints, compliance requirements, or specific packaging preferences while maintaining functional compatibility.

Substiute Parts

M2S005S-VF400

Microchip TechnologyIn Stock: 1081M2S005S-VF400 Datasheet

Current PartRFQ

M2S005-VFG400

Microchip TechnologyIn Stock: 977M2S005-VFG400 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the M2S005S-VF400 is determined by strict equivalence across the following critical parameters: manufacturer (Microchip Technology), product series (SmartFusion2), core processor architecture (ARM Cortex-M3), processor speed (166MHz), memory configuration (128KB flash, 64KB RAM), FPGA capacity (5K logic modules), package type (400-VFBGA 17x17), I/O count (169 pins), operating temperature range (0°C ~ 85°C), and peripheral connectivity options. The substitute part M2S005-VFG400 maintains identical electrical and mechanical specifications across all these parameters, differing only in RoHS compliance status and inventory availability.

Parameter Comparison

Engineering Selection Recommendations

Both M2S005S-VF400 and M2S005-VFG400 are functionally equivalent and maintain active production status. The primary distinction is RoHS compliance: M2S005-VFG400 is ROHS3 compliant while M2S005S-VF400 is RoHS non-compliant. Selection between these parts should be based on regulatory requirements applicable to the end application. If RoHS3 compliance is mandated by design specifications or regional regulations, M2S005-VFG400 is the appropriate selection. If RoHS compliance is not a requirement, either part is suitable. Both parts carry identical REACH unaffected status and ECCN classification (3A991D).

Frequently Asked Questions (FAQ)

Q: Are M2S005S-VF400 and M2S005-VFG400 pin-compatible?

A: Yes. Both parts use the 400-VFBGA (17x17) package with 169 I/O pins in identical pin configurations.

Q: Can M2S005-VFG400 replace M2S005S-VF400 in existing designs?

A: Yes, provided that RoHS compliance requirements are met or not applicable. All electrical and mechanical parameters are identical.

Q: What is the difference between these two part numbers?

A: The parts are electrically and mechanically identical. M2S005-VFG400 is ROHS3 compliant, while M2S005S-VF400 is RoHS non-compliant. The base product number for both is M2S005.

Q: Are there any thermal or performance differences between these substitutes?

A: No. Both parts operate at 166MHz with identical operating temperature range (0°C ~ 85°C TJ), memory configuration, and FPGA capacity.

Q: What is the moisture sensitivity level for both parts?

A: Both parts have Moisture Sensitivity Level 3 with a floor life of 168 hours.

Q: Can I use either part interchangeably in production?

A: Yes, provided your application does not have conflicting RoHS compliance requirements. Verify that your supply chain and regulatory environment support the selected part's compliance status.