M25P10-AVMP6G Equivalent & Substitute Parts

Part Overview

The M25P10-AVMP6G is a 1Mbit NOR Flash memory IC manufactured by Micron Technology Inc., featuring SPI interface operation at 50 MHz with 8-VFQFPN packaging. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing design support and production continuity. Substitute parts must maintain functional compatibility across memory capacity, interface protocol, and electrical operating parameters while accommodating packaging and temperature range variations.

Key Parameters

Parameter	M25P10-AVMP6G
Memory Size	1Mbit
Memory Organization	128K x 8
Memory Interface	SPI
Clock Frequency	50 MHz
Voltage Supply Range	2.3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Package Type	8-VDFN Exposed Pad
Write Cycle Time (Page)	5ms
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

Memory Capacity & Organization: All substitute parts maintain 1Mbit capacity with 128K x 8 organization, ensuring direct functional equivalence at the memory array level.

Interface Protocol: SPI interface is preserved across all substitutes, maintaining software and hardware compatibility with existing controller implementations.

Voltage Supply Range: The M25P10-AVMP6G operates at 2.3V ~ 3.6V. Substitute parts operate at 2.7V ~ 3.6V, which overlaps the upper range and is compatible with standard 3.3V supply systems.

Operating Temperature Range: The original part supports -40°C ~ 85°C. Substitutes SST25VF010A-33-4I-QAE and SST25VF010A-33-4I-QAE-T match this range. Substitutes SST25VF010A-33-4C-QAE and SST25VF010A-33-4C-QAE-T operate at 0°C ~ 70°C, which is narrower and suitable for commercial temperature applications only.

Clock Frequency: Substitute parts operate at 33 MHz, which is lower than the original 50 MHz specification. This represents a functional downgrade in maximum data transfer rate but maintains compatibility with SPI protocol timing requirements.

Package Type: All substitutes use 8-WDFN Exposed Pad packaging, which differs from the original 8-VDFN but maintains equivalent pin count and surface mount compatibility.

Parameter Comparison

Parameter	M25P10-AVMP6G	SST25VF010A-33-4C-QAE	SST25VF010A-33-4C-QAE-T	SST25VF010A-33-4I-QAE	SST25VF010A-33-4I-QAE-T
Manufacturer	Micron Technology Inc.	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Memory Size	1Mbit	1Mbit	1Mbit	1Mbit	1Mbit
Memory Organization	128K x 8	128K x 8	128K x 8	128K x 8	128K x 8
Memory Interface	SPI	SPI	SPI	SPI	SPI
Clock Frequency	50 MHz	33 MHz	33 MHz	33 MHz	33 MHz
Voltage Supply Range	2.3V ~ 3.6V	2.7V ~ 3.6V	2.7V ~ 3.6V	2.7V ~ 3.6V	2.7V ~ 3.6V
Operating Temperature	-40°C ~ 85°C	0°C ~ 70°C	0°C ~ 70°C	-40°C ~ 85°C	-40°C ~ 85°C
Package Type	8-VDFN Exposed Pad	8-WDFN Exposed Pad	8-WDFN Exposed Pad	8-WDFN Exposed Pad	8-WDFN Exposed Pad
Product Status	Obsolete	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

For Extended Temperature Range Applications (-40°C ~ 85°C): Select SST25VF010A-33-4I-QAE or SST25VF010A-33-4I-QAE-T. Both parts maintain the full industrial temperature range of the original M25P10-AVMP6G and are classified as active products with ROHS3 compliance.

For Commercial Temperature Range Applications (0°C ~ 70°C): SST25VF010A-33-4C-QAE and SST25VF010A-33-4C-QAE-T are suitable alternatives. These parts operate within a narrower temperature band appropriate for standard commercial environments.

Packaging Consideration: All substitute parts use 8-WSON packaging instead of the original 8-VFQFPN. PCB layout and footprint modifications are required for physical compatibility.

Clock Frequency Trade-off: The 33 MHz maximum clock frequency of substitute parts is lower than the original 50 MHz specification. System designs must accommodate reduced maximum SPI data transfer rates.

Supply Voltage Compatibility: The substitute parts' minimum supply voltage of 2.7V is higher than the original 2.3V minimum. Designs operating below 2.7V require alternative solutions.

Frequently Asked Questions (FAQ)

Q: Can SST25VF010A-33-4C-QAE be used in place of M25P10-AVMP6G in all applications?

A: SST25VF010A-33-4C-QAE is functionally compatible for memory capacity and SPI interface. However, it operates at 0°C ~ 70°C, which excludes industrial temperature applications requiring -40°C operation. Additionally, the 33 MHz clock frequency is lower than the original 50 MHz specification.

Q: What is the difference between SST25VF010A-33-4I-QAE and SST25VF010A-33-4C-QAE?

A: Both parts are electrically identical with 1Mbit capacity and SPI interface. The primary differences are operating temperature range (SST25VF010A-33-4I-QAE: -40°C ~ 85°C; SST25VF010A-33-4C-QAE: 0°C ~ 70°C) and packaging format (Tube vs. Cut Tape).

Q: Are the SST25VF010A series parts pin-compatible with M25P10-AVMP6G?

A: Both use 8-pin packages with SPI interface pinout compatibility. However, the package types differ (8-VDFN vs. 8-WSON), requiring PCB footprint redesign.

Q: What is the impact of the reduced clock frequency on system performance?

A: The 33 MHz maximum clock frequency of substitute parts reduces the maximum SPI data transfer rate compared to the original 50 MHz specification. System designs must accommodate this lower bandwidth in timing-critical applications.

Q: Are all substitute parts ROHS3 compliant?

A: Yes, all listed substitute parts (SST25VF010A-33-4C-QAE, SST25VF010A-33-4C-QAE-T, SST25VF010A-33-4I-QAE, SST25VF010A-33-4I-QAE-T) are ROHS3 compliant, matching the compliance status of the original M25P10-AVMP6G.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message