M25P10-AVMN6TPYA TR Equivalent & Substitute Parts

Part Overview

The M25P10-AVMN6TPYA TR is a 1Mbit NOR Flash memory IC manufactured by Micron Technology Inc., designed for SPI serial interface applications operating at 50 MHz. This component features 128K x 8 memory organization in an 8-SOIC surface mount package and operates across a 2.3V to 3.6V supply voltage range with temperature stability from -40°C to 85°C.

The M25P10-AVMN6TPYA TR is classified as obsolete. Equivalent substitute parts are necessary for new designs, production continuity, and long-term system support where the original component is no longer available from primary sources.

Key Parameters

Parameter	Value
Memory Type	Non-Volatile FLASH
Memory Size	1Mbit
Memory Organization	128K x 8
Memory Interface	SPI
Clock Frequency	50 MHz
Voltage Supply Range	2.3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Package Type	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	3 (168 Hours)

Substitute Part Grouping Explanation

Substitution eligibility for the M25P10-AVMN6TPYA TR is determined by the following critical parameters:

Memory capacity and organization must remain constant at 1Mbit with 128K x 8 configuration to ensure firmware and software compatibility without modification.

The SPI serial interface is mandatory for direct pin-level compatibility with existing PCB designs and firmware implementations.

Supply voltage range of 2.3V to 3.6V must be maintained or exceeded to ensure operation within the same power distribution architecture.

Operating temperature range of -40°C to 85°C must be met or exceeded to maintain thermal performance specifications.

Package type must be 8-SOIC with identical 0.154" (3.90mm) width to ensure PCB footprint compatibility without layout redesign.

Surface mount mounting type is required for compatibility with existing assembly processes.

RoHS3 compliance and MSL 3 rating ensure regulatory and manufacturing process alignment.

Clock frequency may exceed the original 50 MHz specification, as higher-speed parts are backward compatible with lower-speed applications.

Parameter Comparison

Parameter	M25P10-AVMN6TPYA TR (Main)	W25X10CLSNIG (Substitute)
Manufacturer	Micron Technology Inc.	Winbond Electronics
Memory Type	Non-Volatile FLASH	Non-Volatile FLASH
Memory Format	FLASH - NOR	FLASH
Memory Size	1Mbit	1Mbit
Memory Organization	128K x 8	128K x 8
Memory Interface	SPI	SPI
Clock Frequency	50 MHz	104 MHz
Voltage Supply Range	2.3V ~ 3.6V	2.3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C
Package Type	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	3 (168 Hours)	3 (168 Hours)
Product Status	Obsolete	Active

Engineering Selection Recommendations

The W25X10CLSNIG from Winbond Electronics qualifies as a direct substitute for the M25P10-AVMN6TPYA TR based on matching memory capacity, organization, interface protocol, voltage specifications, temperature range, package geometry, and compliance certifications.

The W25X10CLSNIG operates at 104 MHz clock frequency, which exceeds the original 50 MHz specification. This higher performance parameter is backward compatible with applications designed for the 50 MHz part and does not introduce incompatibility.

Both components maintain ROHS3 compliance and identical MSL 3 ratings, ensuring regulatory alignment and manufacturing process compatibility.

The W25X10CLSNIG carries active product status with verified programmability, providing long-term availability and supply chain stability compared to the obsolete M25P10-AVMN6TPYA TR.

Frequently Asked Questions (FAQ)

Q: Can the W25X10CLSNIG directly replace the M25P10-AVMN6TPYA TR without PCB modifications?

A: Yes. Both components share identical 8-SOIC package dimensions (0.154" width, 3.90mm), pin count, and SPI interface configuration. No PCB layout changes are required.

Q: Does the higher 104 MHz clock frequency of the W25X10CLSNIG create compatibility issues?

A: No. The W25X10CLSNIG operates at a higher maximum frequency than the original 50 MHz specification. Applications designed for 50 MHz operation function correctly with this substitute, as the part supports lower clock speeds within its operational range.

Q: Are the voltage supply requirements identical between both parts?

A: Yes. Both the M25P10-AVMN6TPYA TR and W25X10CLSNIG operate within the 2.3V to 3.6V supply voltage range, ensuring compatibility with existing power distribution circuits.

Q: What is the significance of the active product status for the W25X10CLSNIG?

A: Active product status indicates current manufacturing and availability from the supplier. This ensures long-term supply chain access and reduces obsolescence risk compared to the discontinued M25P10-AVMN6TPYA TR.

Q: Are RoHS and MSL certifications maintained with this substitution?

A: Yes. Both components carry ROHS3 compliance and MSL 3 (168 Hours) ratings, maintaining regulatory and manufacturing process requirements.

Q: What memory capacity does the W25X10CLSNIG provide?

A: The W25X10CLSNIG provides 1Mbit capacity with 128K x 8 organization, identical to the M25P10-AVMN6TPYA TR. No firmware or software modifications are required for memory compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message