M25P10-AVMN6TP TR Equivalent & Substitute Parts

Part Overview

The M25P10-AVMN6TP TR is a 1Mbit NOR Flash memory IC manufactured by Micron Technology Inc., featuring SPI interface operation at 50 MHz. This component is classified as Obsolete, necessitating identification of functionally equivalent alternatives for ongoing design requirements and production continuity. The part is RoHS3 compliant and suitable for applications requiring non-volatile serial flash memory in 8-SOIC packaging.

Substiute Parts

M25P10-AVMN6TP TR

Micron Technology Inc.In Stock: 1118M25P10-AVMN6TP TR Datasheet

Current PartRFQ

MX25L1006EMI-10G

MacronixIn Stock: 122281MX25L1006EMI-10G Datasheet

SimilarRFQ

SST25VF010A-33-4I-SAE

Microchip TechnologyIn Stock: 17888SST25VF010A-33-4I-SAE Datasheet

SimilarRFQ

W25X10CLSNIG

Winbond ElectronicsIn Stock: 95438W25X10CLSNIG Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M25P10-AVMN6TP TR is determined by the following critical parameters:

• Memory Size: 1Mbit (exact match required)
• Memory Organization: 128K x 8 (exact match required)
• Memory Interface: SPI (exact match required)
• Package / Case: 8-SOIC with 0.154" width, 3.90mm Width (exact match required)
• Voltage Supply Range: Must encompass or be compatible with 2.3V ~ 3.6V
• Operating Temperature Range: Must support -40°C ~ 85°C
• Technology: FLASH - NOR or FLASH (compatible)
• RoHS Status: ROHS3 Compliant (required)

All identified substitute parts meet these core electrical and mechanical compatibility criteria. Clock frequency variations above the original 50 MHz specification are acceptable as they represent enhanced performance capability. Write cycle time differences do not preclude substitution provided the substitute meets or exceeds the original timing requirements for the application.

Parameter Comparison

Engineering Selection Recommendations

SST25VF010A-33-4I-SAE is the preferred substitute for new designs and production continuity. This part carries Active product status, ensuring long-term availability and manufacturer support. The MSL rating of 1 (Unlimited) provides superior moisture handling characteristics compared to the original part's MSL 3 rating. All electrical parameters remain within compatible ranges, with the 33 MHz clock frequency providing adequate performance margin for applications originally specified at 50 MHz.

W25X10CLSNIG serves as an alternative substitute with Active product status. This part maintains voltage supply compatibility with the original specification (2.3V ~ 3.6V) and offers enhanced clock frequency capability at 104 MHz. MSL rating of 3 matches the original part's moisture sensitivity level.

MX25L1006EMI-10G is classified as Not For New Designs and should be considered only for legacy system maintenance where design continuity is required. This part exhibits reduced voltage supply range (2.7V ~ 3.6V minimum), which may limit compatibility in applications requiring operation below 2.7V.

All substitute parts maintain RoHS3 compliance and identical package geometry, ensuring direct PCB compatibility without layout modifications.

Frequently Asked Questions (FAQ)

Q: Can SST25VF010A-33-4I-SAE directly replace M25P10-AVMN6TP TR without firmware modifications?

A: Yes. Both parts share identical memory organization (128K x 8), SPI interface protocol, and operating temperature range. The 33 MHz clock frequency of the SST25VF010A-33-4I-SAE is compatible with applications designed for 50 MHz operation. No firmware changes are required for basic read/write functionality.

Q: What is the significance of the MSL rating difference between the main part and SST25VF010A-33-4I-SAE?

A: The original M25P10-AVMN6TP TR has MSL 3 (168 hours maximum exposure to 85°C/85% RH before reflow), while SST25VF010A-33-4I-SAE has MSL 1 (unlimited exposure). MSL 1 indicates superior moisture resistance and provides greater flexibility in storage and handling procedures, reducing risk of moisture-induced failures during assembly.

Q: Why does MX25L1006EMI-10G have a reduced voltage supply minimum of 2.7V?

A: The MX25L1006EMI-10G is specified with a 2.7V minimum supply voltage, compared to the original part's 2.3V minimum. Applications requiring operation below 2.7V cannot use this substitute without voltage regulation modifications.

Q: Are all substitute parts available in the same 8-SOIC package?

A: Yes. All substitute parts are packaged in 8-SOIC (0.154", 3.90mm Width) format, ensuring identical PCB footprint and pin compatibility. No layout changes are required for mechanical substitution.

Q: What is the difference between "Not For New Designs" and "Active" product status?

A: "Active" status indicates the manufacturer actively supports the part with full production capacity and long-term availability commitment. "Not For New Designs" indicates the manufacturer is phasing out the part and recommends alternatives for new applications, though existing inventory may remain available for legacy support.

Q: Can the higher clock frequency of W25X10CLSNIG (104 MHz) cause compatibility issues?

A: No. Higher clock frequency capability does not create compatibility issues. The SPI interface protocol remains identical. Applications designed for 50 MHz operation will function correctly with W25X10CLSNIG, which simply provides additional performance headroom.