M24308/26-2F Equivalent & Substitute Parts

Part Overview

The M24308/26-2F is a jackscrew socket accessory for D-Sub connectors manufactured by Cinch Connectivity Solutions. This component is designed for use with D-Sub connectors in military applications, conforming to MIL-C-24308 specifications. The part is currently active in production with 6,748 units in stock. Equivalent parts are necessary when original inventory is unavailable, when supply chain constraints occur, or when alternative sourcing is required for cost optimization while maintaining functional compatibility.

Substiute Parts

M24308/26-2F

Cinch Connectivity SolutionsIn Stock: 6835M24308/26-2F Datasheet

Current PartRFQ

160-000-011R031

NorComp Inc.In Stock: 4094160-000-011R031 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the M24308/26-2F is determined by the following critical parameters:

• Accessory Type: Must be a jackscrew socket for D-Sub connectors
• Thread Size: Must match 4-40 socket and 4-40 screw specifications
• Application Compatibility: Must be designed for use with D-Sub connectors
• Hardware Inclusion: Must include required hardware

The substitute part 160-000-011R031 meets all these criteria. Both parts function as jackscrew sockets with identical thread specifications (4-40) and are designed for D-Sub connector applications. The primary difference is the manufacturer and specific dimensional characteristics of the threaded portion.

Parameter Comparison

Engineering Selection Recommendations

Both M24308/26-2F and 160-000-011R031 are active products suitable for D-Sub connector jackscrew socket applications with matching 4-40 thread specifications. Selection between these parts should be based on the following factors:

M24308/26-2F (Cinch Connectivity Solutions): Appropriate for applications requiring MIL-C-24308 military specification compliance. RoHS non-compliant status indicates suitability for legacy military and aerospace systems where RoHS restrictions do not apply.

160-000-011R031 (NorComp Inc.): Appropriate for applications requiring ROHS3 compliance. The specified threaded portion length of 0.625" (15.88mm) provides dimensional certainty for design verification. Suitable for modern commercial and industrial applications with RoHS requirements.

Both parts carry EAR99 export classification and include required hardware. Selection should prioritize compliance requirements of the end application and dimensional specifications of the target D-Sub connector assembly.

Frequently Asked Questions (FAQ)

Q: What determines if a jackscrew socket can substitute for the M24308/26-2F?

A: The substitute must match the following criteria: 4-40 thread size (both socket and screw), jackscrew socket accessory type, and design for D-Sub connector compatibility with hardware included.

Q: Are there dimensional differences between M24308/26-2F and 160-000-011R031?

A: The 160-000-011R031 specifies a threaded portion length of 0.625" (15.88mm). The M24308/26-2F does not provide this dimensional specification in available data. Verify dimensional compatibility with your specific D-Sub connector assembly before substitution.

Q: What is the difference in RoHS compliance between these parts?

A: The M24308/26-2F is RoHS non-compliant, suitable for legacy systems. The 160-000-011R031 is ROHS3 compliant, required for modern commercial and industrial applications subject to RoHS regulations.

Q: Can both parts be used interchangeably in military applications?

A: The M24308/26-2F conforms to MIL-C-24308 military specifications. The 160-000-011R031 does not reference military specifications. Verify military specification requirements for your application before substitution.

Q: What packaging is available for these parts?

A: The M24308/26-2F packaging is not specified. The 160-000-011R031 is supplied in box packaging. Confirm packaging requirements for your procurement process.