M24308/24-52F D-Sub Plug 37-Position Right Angle Solder Connector

Part Overview

The M24308/24-52F is a 37-position D-Sub plug connector manufactured by ITT Cannon, LLC, designed for right-angle panel mount and through-hole applications with solder termination. This connector is classified as an active product with 860 units in current inventory. The connector features a 2-row configuration with shell size 4 (DC, C) layout, gold-plated contacts, and steel shell with yellow chromate plated cadmium finish. Equivalent and substitute parts are identified based on matching electrical and mechanical parameters including connector style, position count, mounting type, termination method, and operating temperature range.

Substiute Parts

M24308/24-52F

ITT Cannon, LLCIn Stock: 908M24308/24-52F Datasheet

Current PartRFQ

09654226801

HARTINGIn Stock: 76109654226801 Datasheet

SimilarRFQ

09654626811

HARTINGIn Stock: 98409654626811 Datasheet

SimilarRFQ

09664227801

HARTINGIn Stock: 113009664227801 Datasheet

SimilarRFQ

09664227802

HARTINGIn Stock: 123609664227802 Datasheet

SimilarRFQ

09664626811

HARTINGIn Stock: 102609664626811 Datasheet

SimilarRFQ

09664626812

HARTINGIn Stock: 105409664626812 Datasheet

SimilarRFQ

09664627811

HARTINGIn Stock: 96109664627811 Datasheet

SimilarRFQ

M24308/24-28F

ITT Cannon, LLCIn Stock: 1457M24308/24-28F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the M24308/24-52F are identified based on the following critical parameters that must match or be compatible:

Mandatory Matching Parameters:

• Connector style: D-Sub
• Connector type: Plug, Male Pins
• Number of positions: 37
• Number of rows: 2
• Shell size, connector layout: 4 (DC, C)
• Mounting type: Right Angle (with Through Hole capability)
• Termination: Solder
• Contact type: Signal

Compatible Parameter Ranges:

• Current rating: Equal to or greater than 7.5A
• Operating temperature range: Must encompass or match -55°C to 150°C minimum
• Flange feature: Housing/Shell configurations (M3, 4-40, or Unthreaded)
• Contact form: Stamped or Machined
• Dielectric material: Polyester, PBT, or Glass-Filled variants

Seven substitute parts meet these criteria, all manufactured by HARTING or ITT Cannon, LLC. Substitutes are grouped by flange feature type and contact form characteristics, which affect mechanical mounting compatibility while maintaining electrical equivalence.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Manufacturer): M24308/24-28F is the primary equivalent, manufactured by ITT Cannon, LLC under the same 24308-Style series. This part maintains identical electrical and mechanical specifications including 7.5A current rating, -55°C to 150°C operating temperature, gold-plated contacts, and unthreaded flange configuration. Both parts are RoHS non-compliant and suitable for legacy system applications.

HARTING Substitutes (ROHS3 Compliant): All HARTING substitutes (09654226801, 09654626811, 09664227801, 09664227802, 09664626811, 09664626812, 09664627811) are ROHS3 compliant and REACH unaffected, making them suitable for applications requiring environmental compliance. These parts maintain the 37-position, 2-row D-Sub configuration with right-angle solder termination.

Temperature Consideration: HARTING substitutes operate at -55°C to 125°C, which is 25°C lower than the M24308/24-52F maximum of 150°C. Applications requiring operation above 125°C must use M24308/24-52F or M24308/24-28F.

Current Rating Consideration: HARTING parts 09654226801 and 09654626811 are rated at 6.5A, which is 1.0A lower than the main part's 7.5A rating. Applications requiring 7.5A current capacity must use M24308/24-52F, M24308/24-28F, or the remaining HARTING substitutes (09664227801, 09664227802, 09664626811, 09664626812, 09664627811).

Flange Feature Selection: Unthreaded flange: M24308/24-52F, M24308/24-28F M3 threaded flange: 09654226801, 09654626811, 09664227801, 09664626811, 09664627811 4-40 threaded flange: 09664227802, 09664626812

Contact Form: Stamped contacts: M24308/24-52F, M24308/24-28F, 09654226801, 09654626811 Machined contacts: 09664227801, 09664227802, 09664626811, 09664626812, 09664627811

Frequently Asked Questions (FAQ)

Q: Can HARTING parts replace ITT Cannon M24308/24-52F in all applications? A: HARTING substitutes are electrically and mechanically compatible for most applications. However, applications requiring operation above 125°C or 7.5A current capacity must use ITT Cannon parts. Additionally, flange feature differences (M3 or 4-40 threaded versus unthreaded) must match mechanical mounting requirements.

Q: What is the difference between stamped and machined contacts? A: Both contact forms are functionally equivalent for signal transmission. Machined contacts (HARTING 09664227801, 09664227802, 09664626811, 09664626812, 09664627811) provide consistent geometry and are typically used in higher-reliability applications. Stamped contacts (M24308/24-52F, M24308/24-28F, 09654226801, 09654626811) are cost-effective alternatives with equivalent electrical performance.

Q: Are HARTING parts suitable for RoHS-restricted applications? A: Yes. All HARTING substitutes are ROHS3 compliant and REACH unaffected, making them suitable for applications subject to RoHS Directive 2011/65/EU. ITT Cannon M24308/24-52F and M24308/24-28F are RoHS non-compliant and must be used only in applications exempt from RoHS requirements.

Q: What packaging options are available? A: M24308/24-52F and most HARTING substitutes are supplied in bulk packaging. HARTING 09664227801 is supplied in tray packaging. Packaging selection does not affect electrical or mechanical compatibility.

Q: How do flange features affect mechanical compatibility? A: Flange features determine mounting method. Unthreaded flanges (M24308/24-52F, M24308/24-28F) mount without fasteners. M3 threaded flanges use M3 screws for panel mounting. 4-40 threaded flanges use 4-40 screws. Mechanical mounting design must accommodate the selected flange type.

Q: Can parts with different current ratings be used interchangeably? A: Parts with equal or higher current ratings are interchangeable. HARTING 09654226801 and 09654626811 (6.5A) cannot replace M24308/24-52F (7.5A) in applications requiring 7.5A capacity. All other substitutes maintain 7.5A rating and are fully interchangeable for current capacity.

Q: What is the significance of contact finish thickness? A: M24308/24-52F specifies 50.0µin (1.27µm) gold plating thickness. HARTING substitutes do not specify contact finish thickness, indicating standard industrial plating. Both are suitable for signal-level applications with equivalent contact reliability.