M24308/24-25F D-Sub Plug 9-Position Right Angle Solder Connector

Part Overview

The M24308/24-25F is a 9-position D-Sub plug connector manufactured by ITT Cannon, LLC, designed for panel mount through-hole and right-angle solder applications. This connector features male pins, a DE shell size (1 position layout), and is rated for 7.5A continuous current with an operating temperature range of -55°C to 150°C. The part is currently active in production with 1094 units in stock. Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when alternative compliance certifications are required, or when design flexibility permits selection from qualified alternatives meeting the same electrical and mechanical specifications.

Substiute Parts

M24308/24-25F

ITT Cannon, LLCIn Stock: 1179M24308/24-25F Datasheet

Current PartRFQ

09651636811

HARTINGIn Stock: 86709651636811 Datasheet

SimilarRFQ

09651636812

HARTINGIn Stock: 95009651636812 Datasheet

SimilarRFQ

09661226801

HARTINGIn Stock: 105609661226801 Datasheet

SimilarRFQ

09661226802

HARTINGIn Stock: 114409661226802 Datasheet

SimilarRFQ

09661626812

HARTINGIn Stock: 112809661626812 Datasheet

SimilarRFQ

09661627812

HARTINGIn Stock: 92509661627812 Datasheet

SimilarRFQ

09670095663

HARTINGIn Stock: 100309670095663 Datasheet

SimilarRFQ

09670095664

HARTINGIn Stock: 115309670095664 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the M24308/24-25F are qualified based on the following critical parameters that must match or exceed the original specification:

Mandatory Matching Parameters:

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 9
• Number of Rows: 2
• Shell Size, Connector Layout: 1 (DE, E)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Type: Signal

Electrical Performance Parameters:

• Current Rating: Minimum 7.5A (substitute parts rated 6.5A or higher are acceptable; 7.5A matches original)
• Operating Temperature: Minimum -55°C to 125°C (original supports -55°C to 150°C; substitutes at -55°C to 125°C are acceptable for most applications)

Mechanical Compatibility Parameters:

• Flange Feature: Housing/Shell mounting interface (Unthreaded, M3, or 4-40 variants all provide mechanical compatibility)
• Backset Spacing: 0.409" (10.40mm) where specified

The HARTING substitute parts (09651636811, 09651636812, 09661226801, 09661226802, 09661626812, 09661627812, 09670095663, 09670095664) meet all mandatory parameters. Variations in flange feature (Unthreaded, M3, 4-40), contact form (Stamped vs. Machined), and dielectric material (PBT vs. Polyester) represent design alternatives within the same functional class and do not prevent substitution when mechanical mounting interfaces are compatible.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Full Compatibility): 09670095664 and 09670095663 are the closest functional equivalents to the M24308/24-25F. Both feature unthreaded housing/shell flanges matching the original design, 7.5A current rating, and active product status. These parts are ROHS3 compliant, offering improved environmental compliance compared to the non-compliant original part.

Secondary Substitutes (Conditional Compatibility): 09661226802, 09661226801, 09661627812, and 09661626812 provide 7.5A current rating and active status but feature threaded flange options (M3 or 4-40). These are suitable when panel mounting interfaces accommodate threaded fastening. All are ROHS3 compliant.

Limited Substitutes (Current Rating Consideration): 09651636811 and 09651636812 are rated for 6.5A, below the original 7.5A specification. These parts are acceptable only in applications where the actual circuit current demand does not exceed 6.5A. Both are ROHS3 compliant and feature threaded flanges (M3 or 4-40).

Temperature Derating: All HARTING substitutes operate to -55°C to 125°C, compared to the original -55°C to 150°C. Applications requiring operation above 125°C must retain the original M24308/24-25F or identify alternatives with extended temperature ratings.

Compliance Transition: The original M24308/24-25F is RoHS non-compliant. All HARTING substitutes are ROHS3 compliant, supporting regulatory compliance requirements in new designs or product updates.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 6.5A-rated part (09651636811 or 09651636812) for the 7.5A-rated M24308/24-25F? A: Substitution is permissible only if the actual circuit current does not exceed 6.5A. The original specification of 7.5A must be verified against actual application requirements. If the circuit is designed for 7.5A operation, these parts are not suitable.

Q: What is the difference between unthreaded and threaded (M3 or 4-40) flange options? A: Flange type determines the panel mounting interface. Unthreaded flanges (M24308/24-25F, 09670095663, 09670095664) use friction fit or adhesive mounting. M3 and 4-40 threaded flanges provide screw-fastened mounting. Selection depends on the panel cutout and mounting hardware available in your application.

Q: Are the HARTING substitutes electrically and mechanically compatible with the ITT Cannon original? A: Yes, all HARTING parts listed maintain the same 9-position D-Sub plug configuration, male pin arrangement, DE shell size, right-angle solder termination, and signal contact type. Electrical performance is equivalent or superior. Mechanical compatibility depends on flange type matching your panel interface.

Q: Why do the HARTING parts have different dielectric materials (PBT vs. Polyester)? A: Both polyester and PBT (polybutylene terephthalate) are acceptable dielectric materials for D-Sub connectors in this application class. PBT offers improved mechanical properties and is commonly used in modern connector designs. This material difference does not affect functional substitution.

Q: What is the impact of the temperature rating difference (-55°C to 125°C vs. -55°C to 150°C)? A: The HARTING substitutes are rated to 125°C maximum, while the original supports 150°C. For applications operating below 125°C, this difference is not significant. Applications requiring sustained operation above 125°C must use the original part or identify alternatives with extended temperature ratings.

Q: Are all HARTING substitutes RoHS compliant? A: Yes, all HARTING substitute parts listed are ROHS3 compliant. The original M24308/24-25F is RoHS non-compliant. If your design or regulatory environment requires RoHS compliance, any HARTING substitute provides this certification.

Q: What packaging options are available? A: The M24308/24-25F is supplied in bulk packaging. Most HARTING substitutes are also bulk packaged, with the exception of 09661626812, which is supplied in tray packaging. Packaging selection may affect handling and storage procedures but does not impact electrical or mechanical performance.

Q: Can I use 09661226801 or 09661226802 as direct replacements? A: Yes, both parts are direct functional replacements with 7.5A current rating and active status. The primary difference is the flange type (M3 for 09661226801, 4-40 for 09661226802). Selection depends on your panel mounting interface compatibility.