M24308/1-4Z D-Sub 37-Position Receptacle Connector Equivalent & Substitute Parts

Part Overview

The M24308/1-4Z is a 37-position D-Sub receptacle connector manufactured by ITT Cannon, LLC, designed for panel mount applications with solder cup termination. This connector features female sockets in a 2-row configuration with shell size 4 (DC, C) layout. The part is currently active in production with 1156 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector interface, enabling direct functional replacement in applications where the primary part becomes unavailable or when alternative sourcing is required.

Substiute Parts

M24308/1-4Z

ITT Cannon, LLCIn Stock: 1227M24308/1-4Z Datasheet

Current PartRFQ

09670374704

HARTINGIn Stock: 120809670374704 Datasheet

SimilarRFQ

09670374715

HARTINGIn Stock: 92909670374715 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the M24308/1-4Z are identified based on strict equivalence of the following parameters:

• Connector style: D-Sub
• Connector type: Receptacle, Female Sockets
• Number of positions: 37
• Number of rows: 2
• Shell size and layout: 4 (DC, C)
• Termination method: Solder Cup
• Current rating: 7.5A
• Contact type: Signal
• Flange feature: Housing/Shell (Unthreaded)

The substitute parts HARTING 09670374704 and HARTING 09670374715 meet all these core electrical and mechanical parameters. Differences in mounting type (free hanging versus panel mount), operating temperature ranges, shell material finish, and compliance certifications are noted in the parameter comparison table below. These differences do not affect the core connector interface compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and are available in stock. The M24308/1-4Z and substitute parts 09670374704 and 09670374715 are electrically and mechanically equivalent at the connector interface level.

For applications requiring RoHS3 compliance, parts 09670374704 and 09670374715 are suitable alternatives. The M24308/1-4Z is RoHS non-compliant and should be selected only when legacy compliance requirements or specific material specifications are mandated.

Operating temperature range differs across the three parts. The M24308/1-4Z supports -55°C to 150°C, part 09670374715 supports -55°C to 125°C, and part 09670374704 supports -40°C to 85°C. Selection should be based on the application's thermal operating envelope.

Mounting type differs: the M24308/1-4Z is panel mount, while both HARTING substitutes are free hanging (in-line). This difference affects mechanical integration and must be evaluated against the specific application's mounting requirements.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09670374704 or 09670374715 be used as direct replacements for M24308/1-4Z in all applications?

A: Both HARTING parts are electrically and mechanically equivalent at the connector interface. However, the mounting type differs: M24308/1-4Z is panel mount while the HARTING parts are free hanging (in-line). Substitution is valid only when the application's mounting configuration can accommodate free hanging termination.

Q: What is the difference between HARTING 09670374704 and 09670374715?

A: Both parts are identical in electrical and mechanical specifications. The primary difference is operating temperature range: 09670374704 operates from -40°C to 85°C, while 09670374715 operates from -55°C to 125°C. Selection depends on the application's thermal requirements.

Q: Are the HARTING substitutes RoHS compliant?

A: Yes, both HARTING parts (09670374704 and 09670374715) are ROHS3 compliant. The original M24308/1-4Z is RoHS non-compliant. If RoHS compliance is required, the HARTING substitutes are appropriate alternatives.

Q: What is the significance of the different dielectric materials?

A: The M24308/1-4Z uses polyester dielectric material, while both HARTING substitutes use polybutylene terephthalate (PBT) with polyester and glass filling. Both materials are suitable for signal-level D-Sub connectors. Material selection should be confirmed against specific application requirements for chemical resistance or mechanical properties.

Q: Does the difference in shell material finish affect connector performance?

A: The M24308/1-4Z features steel with yellow chromate plated zinc finish, while HARTING parts feature steel without specified finish. Both provide adequate corrosion protection for typical industrial environments. Application-specific environmental conditions should be evaluated to determine if the chromate plating is required.