M22-7130342 Equivalent & Substitute Parts

Part Overview

The M22-7130342 is a 3-position receptacle connector manufactured by Harwin Inc., designed for board-to-board or cable applications with 0.079" (2.00mm) pitch spacing. This through-hole component features gold-plated mating contacts, solder termination, and push-pull fastening. The connector is actively produced and widely used in general purpose, industrial, and telecommunications applications. Substitute parts may be required due to inventory availability, lead time constraints, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

M22-7130342

Harwin Inc.In Stock: 1079M22-7130342 Datasheet

Current PartRFQ

NPPN031BFCN-RC

Sullins Connector SolutionsIn Stock: 42569NPPN031BFCN-RC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M22-7130342 is determined by strict alignment of the following critical parameters:

• Connector Type Compatibility: The substitute must be a receptacle connector to mate with corresponding header connectors in the application circuit
• Position Count: Exactly 3 positions required for pin-to-pin compatibility
• Pitch Specification: 0.079" (2.00mm) mating pitch is mandatory for mechanical alignment
• Mounting Configuration: Through-hole mounting type ensures PCB integration compatibility
• Termination Method: Solder termination required for assembly process compatibility
• Contact Finish: Gold plating on mating contacts ensures electrical performance and corrosion resistance
• Electrical Ratings: Minimum 2A current rating and 500VAC voltage rating required for application safety
• Temperature Range: Operating range of -40°C to 105°C or broader ensures thermal compatibility
• Regulatory Compliance: UL94 V-0 flammability rating and ROHS3 compliance required for safety and environmental standards

The substitute part NPPN031BFCN-RC from Sullins Connector Solutions meets all critical substitution criteria.

Parameter Comparison

Engineering Selection Recommendations

The M22-7130342 and NPPN031BFCN-RC are functionally equivalent for applications requiring 3-position, 0.079" pitch through-hole connectors with gold-plated contacts and 2A current capacity. Both components maintain active product status and full compliance with ROHS3 and REACH regulations. Selection between these parts should be based on inventory availability, lead time requirements, and cost considerations, as all critical electrical, mechanical, and regulatory parameters are equivalent. Both components carry UL94 V-0 flammability certification and unlimited moisture sensitivity rating, ensuring suitability for industrial and telecommunications applications across the specified temperature range.

Frequently Asked Questions (FAQ)

Q: Can NPPN031BFCN-RC be used as a direct replacement for M22-7130342?

A: Yes. Both connectors share identical mating pitch (0.079"), position count (3), mounting type (through-hole), termination method (solder), contact finish (gold), current rating (2A), operating temperature range (-40°C to 105°C), and flammability rating (UL94 V-0). The connectors are mechanically and electrically compatible for board-to-board applications.

Q: What is the difference between a receptacle and header connector?

A: A receptacle connector contains female sockets that accept male pins from a header connector. The M22-7130342 is a receptacle; NPPN031BFCN-RC is a header. These components form complementary mating pairs in connector systems.

Q: Are there any packaging differences between these parts?

A: Both components are supplied in tube packaging. No packaging format changes are required when substituting between these parts.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both M22-7130342 and NPPN031BFCN-RC are ROHS3 compliant, REACH unaffected, and carry UL94 V-0 flammability certification. They meet identical regulatory requirements for industrial and telecommunications applications.

Q: What is the mated stacking height for these connectors?

A: The M22-7130342 specifies a mated stacking height of 5.9mm. This dimension is critical for applications with height constraints. Verify this specification against your PCB layout requirements before component selection.

Q: Are both parts suitable for -40°C to 105°C operating environments?

A: Yes. Both connectors are rated for continuous operation across the -40°C to 105°C temperature range, making them suitable for industrial and telecommunications applications in variable thermal environments.