M22-5630405 Equivalent & Substitute Parts

Part Overview

The M22-5630405 is a rectangular connector header manufactured by Harwin Inc., designed for 2mm pitch board-to-board connections with 8 positions across 2 rows. This component is classified as obsolete, making identification of suitable substitutes essential for ongoing design support and procurement planning. The part maintains ROHS3 compliance and unlimited moisture sensitivity rating, supporting applications requiring reliable interconnection in standard operating environments.

Substiute Parts

M22-5630405

Harwin Inc.In Stock: 982M22-5630405 Datasheet

Current PartRFQ

M22-5430405

Harwin Inc.In Stock: 2462M22-5430405 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The M22-5430405 qualifies as a direct substitute for the M22-5630405 based on the following critical parameters:

• Pitch alignment: Both parts maintain 0.079" (2.00mm) mating pitch
• Position configuration: Both feature 8 positions across 2 rows
• Connector category: Both are rectangular connectors within the same product family (M22 series)
• Compliance equivalence: Both maintain ROHS3 compliance and REACH unaffected status
• Moisture sensitivity: Both rated at MSL 1 (Unlimited)
• Manufacturer consistency: Both manufactured by Harwin Inc.

The primary distinction is mounting orientation: M22-5630405 is a through-hole header, while M22-5430405 is a surface mount right-angle header. This difference requires PCB layout modification but does not affect electrical compatibility or mating interface specifications.

Parameter Comparison

Engineering Selection Recommendations

The M22-5430405 is the designated manufacturer substitute for the obsolete M22-5630405. Selection of this alternative is supported by:

• Active product status: M22-5430405 maintains active production status, ensuring long-term availability and supply chain stability
• Regulatory compliance alignment: Both parts meet ROHS3 and REACH requirements, maintaining compliance posture across design transitions
• Electrical interface compatibility: Identical pitch and position configuration ensure mating compatibility with existing connector receptacles
• Moisture and environmental rating equivalence: MSL 1 rating on both parts confirms suitability for standard storage and operational conditions

Implementation requires PCB layout modification to accommodate surface mount right-angle orientation in place of through-hole straight mounting. No changes to mating interface specifications or electrical performance characteristics are required.

Frequently Asked Questions (FAQ)

Q: Can M22-5430405 directly replace M22-5630405 without PCB modification?

A: Electrical and mating interface compatibility is maintained. However, PCB layout modification is required due to the change from through-hole to surface mount right-angle mounting. The connector footprint and component placement will differ.

Q: Are the compliance certifications equivalent between these parts?

A: Yes. Both parts maintain ROHS3 compliance and REACH unaffected status. Moisture sensitivity level is identical at MSL 1 (Unlimited), confirming equivalent environmental performance ratings.

Q: What is the primary functional difference between these connectors?

A: The M22-5630405 is a through-hole straight header, while the M22-5430405 is a surface mount right-angle header. Both maintain the same 2mm pitch and 8-position, 2-row configuration. The orientation and mounting method differ, requiring corresponding PCB design changes.

Q: Is the M22-5430405 available in the same packaging as the original part?

A: The M22-5430405 is supplied in bulk packaging. Packaging specifications for the original M22-5630405 were not provided in the technical data.

Q: Are there electrical performance differences in current rating or operating temperature?

A: The M22-5430405 specifies 1.5A per contact and -40°C to 105°C operating temperature range. Equivalent specifications for the M22-5630405 were not provided in the available technical documentation.