M2032SS2W30 Equivalent & Substitute Parts

Part Overview

The M2032SS2W30 is a toggle switch manufactured by NKK Switches, classified as a 3PDT (three-pole double-throw) through-hole component with right-angle mounting. This switch is rated for 6A at 125V AC and 4A at 30V DC, featuring a standard round actuator with epoxy sealed terminals. The product is currently obsolete, making identification of equivalent and substitute parts essential for ongoing maintenance, repair, and design continuity in applications requiring compatible switching functionality.

Substiute Parts

M2032SS2W30

NKK SwitchesIn Stock: 764M2032SS2W30 Datasheet

Current PartRFQ

MN32SS2W30

NKK SwitchesIn Stock: 784MN32SS2W30 Datasheet

MFR RecommendedRFQ

7301L2D9ABE

C&KIn Stock: 9797301L2D9ABE Datasheet

SimilarRFQ

7301SY9ABE

C&KIn Stock: 7257301SY9ABE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2032SS2W30 is determined by the following critical parameters:

Primary Compatibility Criteria:

• Circuit configuration (3PDT)
• Switch function (On-On)
• Mounting type (Through Hole, Right Angle)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• RoHS3 compliance

Secondary Consideration:

• Current and voltage ratings must not exceed the application requirements of the original design

The substitute parts identified maintain the core electrical and mechanical architecture of the M2032SS2W30 while offering active product status and continued manufacturer support. Substitutes are grouped based on their alignment with these parameters and their availability in the current market.

Parameter Comparison

Engineering Selection Recommendations

MN32SS2W30 (NKK Switches - Manufacturer Recommended): This part is the primary substitute, manufactured by NKK Switches, the original equipment manufacturer. It maintains active product status and ROHS3 compliance. This option provides the highest compatibility assurance and continuity with the original design lineage. Selection of this part is appropriate when maintaining manufacturer consistency and design heritage is a priority.

7301L2D9ABE and 7301SY9ABE (C&K - Cross-Manufacturer Alternatives): Both C&K parts maintain the required 3PDT circuit configuration, On-On function, through-hole right-angle mounting, and PC pin termination. Both are active products with ROHS3 compliance. These parts feature extended electrical life (100,000 cycles versus 25,000 cycles) and identical operating temperature ranges. However, both C&K alternatives are rated at 0.4VA (20V AC/DC), which represents reduced current and voltage capacity compared to the original M2032SS2W30 (6A at 125V AC, 4A at 30V DC). Selection of C&K alternatives is appropriate only for applications where the lower electrical ratings are sufficient for the intended use case.

Frequently Asked Questions (FAQ)

Q: Can the MN32SS2W30 be used as a direct replacement for the M2032SS2W30?

A: Yes. The MN32SS2W30 is the manufacturer-recommended substitute from NKK Switches. Both parts share identical circuit configuration (3PDT), switch function (On-On), mounting type (through-hole right angle), termination style (PC pin), and operating temperature range (-30°C to 85°C). Both are ROHS3 compliant. The MN32SS2W30 is an active product, addressing the obsolescence of the M2032SS2W30.

Q: What are the key differences between the NKK and C&K substitute options?

A: The primary difference is electrical rating. The M2032SS2W30 and MN32SS2W30 are rated for 6A at 125V AC and 4A at 30V DC. The C&K alternatives (7301L2D9ABE and 7301SY9ABE) are rated for 0.4VA at 20V AC/DC. Both C&K parts offer extended electrical life (100,000 cycles) compared to the original specification (25,000 cycles). Packaging differs: 7301L2D9ABE is supplied in bulk, while 7301SY9ABE is supplied in trays.

Q: Are the C&K parts suitable for all applications using the M2032SS2W30?

A: The C&K parts are suitable only for applications where the electrical requirements do not exceed 0.4VA at 20V. Applications requiring the full 6A at 125V AC or 4A at 30V DC ratings must use the MN32SS2W30 or equivalent NKK product. Electrical rating compatibility must be confirmed before substitution.

Q: What is the difference between the two C&K substitute parts?

A: The 7301L2D9ABE and 7301SY9ABE are electrically and functionally identical. The primary difference is packaging: 7301L2D9ABE is supplied in bulk packaging, while 7301SY9ABE is supplied in tray packaging. Selection between these parts depends on procurement and inventory management requirements.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The M2032SS2W30, MN32SS2W30, 7301L2D9ABE, and 7301SY9ABE are all ROHS3 compliant, ensuring compatibility with regulatory requirements for electronic components in applicable markets.

Q: What is the actuator length difference between the main part and substitutes?

A: The M2032SS2W30 has an actuator length of 10.50mm. The 7301L2D9ABE has an actuator length of 15.75mm, while the 7301SY9ABE has an actuator length of 10.67mm. The MN32SS2W30 actuator length is not specified. Actuator length may affect panel cutout compatibility and should be confirmed for mechanical fit in the intended application.