M2022SS2W13 Equivalent & Substitute Parts

Part Overview

The M2022SS2W13 is a toggle switch manufactured by NKK Switches, classified as a DPDT (Double Pole Double Throw) through-hole component with a 6A AC / 4A DC current rating at 125V AC / 30V DC. This part is currently listed as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing design support and component procurement.

Substiute Parts

M2022SS2W13

NKK SwitchesIn Stock: 701M2022SS2W13 Datasheet

Current PartRFQ

MN22SS2W13

NKK SwitchesIn Stock: 1081MN22SS2W13 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2022SS2W13 is determined by the following critical parameters:

• Circuit configuration (DPDT)
• Switch function (On-On)
• Current and voltage ratings (6A AC / 125V AC minimum; 4A DC / 30V DC minimum)
• Mounting type (Through Hole)
• Termination style (PC Pin)
• Panel cutout dimensions (Circular - 6.50mm Dia)
• Operating temperature range (-30°C ~ 85°C)
• Regulatory compliance (ROHS3 Compliant)

The substitute part MN22SS2W13 is identified as a manufacturer-recommended equivalent from NKK Switches. Both parts share the same base product number (M2022SS) and maintain identical electrical specifications and mechanical interfaces.

Parameter Comparison

Engineering Selection Recommendations

The MN22SS2W13 is the manufacturer-recommended substitute for the obsolete M2022SS2W13. Both components are manufactured by NKK Switches and share identical electrical and mechanical specifications. The primary distinction is product status: M2022SS2W13 is obsolete while MN22SS2W13 is active and currently in production.

Selection of MN22SS2W13 is supported by:

• Identical DPDT circuit configuration and On-On switch function
• Matching current and voltage ratings (6A AC / 125V AC; 4A DC / 30V DC)
• Identical through-hole mounting interface and PC pin termination
• Matching panel cutout dimensions (Circular - 6.50mm Dia)
• Identical operating temperature range (-30°C ~ 85°C)
• ROHS3 compliance maintained across both parts
• Active production status ensuring long-term availability

Frequently Asked Questions (FAQ)

Q: Can MN22SS2W13 be used as a direct replacement for M2022SS2W13?

A: Yes. Both parts share identical electrical specifications (DPDT, 6A AC / 125V AC, 4A DC / 30V DC), mechanical interfaces (through-hole mounting, PC pin termination), and panel cutout dimensions (Circular - 6.50mm Dia). The MN22SS2W13 is the active production equivalent.

Q: What is the primary reason for substitution?

A: The M2022SS2W13 is obsolete. The MN22SS2W13 provides functional equivalence with active manufacturing status and ongoing availability.

Q: Are there any differences in packaging between these parts?

A: The M2022SS2W13 is supplied in Tray packaging, while MN22SS2W13 is supplied in Bulk packaging. This distinction affects procurement and handling but does not impact electrical or mechanical performance.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both M2022SS2W13 and MN22SS2W13 are ROHS3 compliant and carry the same ECCN (EAR99) and HTSUS (8536.50.9065) classifications.

Q: What are the critical parameters for confirming substitution compatibility?

A: Verify that the replacement application requires DPDT On-On switching at 6A AC / 125V AC or 4A DC / 30V DC maximum, through-hole mounting with PC pin termination, and a circular 6.50mm diameter panel cutout. Operating temperature must remain within -30°C ~ 85°C.