M2022LL2W30 Equivalent & Substitute Parts

Part Overview

The M2022LL2W30 is a toggle switch manufactured by NKK Switches, configured as a DPDT (Double Pole Double Throw) through-hole component with a right-angle mounting orientation. This switch is rated for 6A at 125V AC and 4A at 30V DC, featuring a locking lever actuator with epoxy sealed terminals. The product is currently obsolete, making identification of functionally equivalent alternatives necessary for ongoing maintenance, repair, and legacy system support.

Substiute Parts

M2022LL2W30

NKK SwitchesIn Stock: 1147M2022LL2W30 Datasheet

Current PartRFQ

MN22LL2W30

NKK SwitchesIn Stock: 816MN22LL2W30 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The MN22LL2W30 is identified as a manufacturer-recommended substitute for the M2022LL2W30. Substitution eligibility is determined by the following critical parameters:

• Circuit configuration (DPDT)
• Switch function (On-On)
• Current and voltage ratings (6A at 125V AC; 4A at 30V DC)
• Mounting type (Through Hole, Right Angle)
• Actuator type and length (Locking Lever, 16.50mm)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Electrical life specification (25,000 Cycles)

The MN22LL2W30 maintains compatibility across all specified electrical and mechanical parameters, enabling direct functional replacement in applications requiring these exact characteristics.

Parameter Comparison

Engineering Selection Recommendations

The MN22LL2W30 is the designated manufacturer-recommended substitute for the obsolete M2022LL2W30. Both components are manufactured by NKK Switches and maintain identical electrical specifications, mechanical configuration, and environmental operating parameters. The MN22LL2W30 carries active product status, ensuring ongoing availability and supply chain continuity. Both parts maintain ROHS3 compliance, supporting regulatory requirements for electronic component procurement. Selection of the MN22LL2W30 for replacement applications is based on complete parameter equivalence and manufacturer recommendation.

Frequently Asked Questions (FAQ)

Q: Can the MN22LL2W30 directly replace the M2022LL2W30 in existing applications?

A: Yes. The MN22LL2W30 maintains identical electrical ratings (6A at 125V AC, 4A at 30V DC), circuit configuration (DPDT), mounting type (Through Hole, Right Angle), and actuator specifications. Direct substitution is supported without circuit modification.

Q: What is the primary reason for seeking a substitute for the M2022LL2W30?

A: The M2022LL2W30 is classified as obsolete. The MN22LL2W30 provides functional equivalence with active product status, ensuring component availability for repair and maintenance applications.

Q: Are there packaging differences between the M2022LL2W30 and MN22LL2W30?

A: The M2022LL2W30 is specified with dash packaging, while the MN22LL2W30 is supplied in bulk packaging. Both components are identical in form, fit, and function.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both the M2022LL2W30 and MN22LL2W30 are ROHS3 compliant and carry the same ECCN (EAR99) and HTSUS (8536.50.9065) classifications.

Q: What electrical parameters must be verified when substituting these components?

A: Verify that the application circuit operates within the specified ratings: 6A maximum at 125V AC or 4A maximum at 30V DC. The DPDT configuration and On-On switch function must match the original circuit design.