M2015TJW01-FC-2A-C Equivalent & Substitute Parts

Part Overview

The M2015TJW01-FC-2A-C is a rocker switch manufactured by NKK Switches, classified as SPDT (Single Pole Double Throw) with a rated capacity of 6A at 125V AC and 3A at 30V DC. This component features panel mount, snap-in installation with illuminated red LED actuator and solder lug termination. The part is currently obsolete, necessitating identification of functionally equivalent alternatives for ongoing system support and new designs.

Substiute Parts

M2015TJW01-FC-2A-C

NKK SwitchesIn Stock: 754M2015TJW01-FC-2A-C Datasheet

Current PartRFQ

MN15TJW01-FC-2A-C

NKK SwitchesIn Stock: 907MN15TJW01-FC-2A-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2015TJW01-FC-2A-C is determined by the following critical parameters:

• Circuit configuration (SPDT)
• Current and voltage ratings (6A AC / 3A DC at 125V AC / 30V DC)
• Mounting type (Panel Mount, Snap-In)
• Actuator characteristics (Concave, Illuminated, Red LED)
• Illumination voltage specification (2.8 VDC)
• Termination style (Solder Lug)
• Panel cutout dimensions (15.90mm x 12.50mm)
• Operating temperature range (-30°C to 85°C)
• Regulatory compliance (RoHS3, CSA, UL)

The MN15TJW01-FC-2A-C qualifies as a manufacturer-recommended substitute based on matching electrical specifications, mechanical interface requirements, and environmental operating parameters.

Parameter Comparison

Engineering Selection Recommendations

The MN15TJW01-FC-2A-C is designated as the manufacturer-recommended substitute for the obsolete M2015TJW01-FC-2A-C. The substitute part carries active product status, ensuring ongoing availability and manufacturing support. Both parts share identical ECCN and HTSUS classifications, confirming regulatory alignment. The transition from obsolete to active status provides supply chain continuity and access to current manufacturing quality standards.

Selection of the MN15TJW01-FC-2A-C is appropriate for applications requiring direct replacement of the M2015TJW01-FC-2A-C in existing designs or new implementations where SPDT rocker switch functionality with illuminated red LED actuation and solder lug termination is specified.

Frequently Asked Questions (FAQ)

Q: What makes MN15TJW01-FC-2A-C a valid substitute for M2015TJW01-FC-2A-C?

A: The MN15TJW01-FC-2A-C is the manufacturer-recommended equivalent designated by NKK Switches. Both parts share the same base product number series and are classified under identical tariff codes (HTSUS 8536.50.9065), indicating functional and mechanical equivalence.

Q: Why is the original part marked as obsolete?

A: The M2015TJW01-FC-2A-C has reached end-of-life status. The MN15TJW01-FC-2A-C maintains active product status, ensuring continued manufacturing and supply availability.

Q: Are the panel cutout dimensions identical between the two parts?

A: Panel cutout dimension data for the MN15TJW01-FC-2A-C is not provided in the available specifications. Confirmation of mechanical compatibility should be obtained from NKK Switches technical documentation prior to implementation.

Q: What is the difference between the part number prefixes M2015 and MN15?

A: The prefix variation indicates a product line evolution within the NKK Switches rocker switch portfolio. The MN15 designation represents the current active series, while M2015 represents the superseded series.

Q: Can I use inventory of M2015TJW01-FC-2A-C interchangeably with MN15TJW01-FC-2A-C?

A: Direct interchangeability is supported by the manufacturer-recommended substitution designation. However, mechanical fit verification at the panel cutout interface is recommended before full-scale deployment.